Hi guys,
Back to the future here on this 3rd revived Minix forum (1st time used it some good years ago)...
I have an "old" Neo X8-H with the "latest" 009FW (20160328), which is still running great. I also have couple of apps which are not working anymore, as they requires Android 5.0 as minimum (like HBO GO).
I also have from the old forum a Probox Lollipop 5.1.1 FW, which seems to be based on the original PROBOX2-EX+-20161221 firmware, that was patched with few things (like theMinix boot logo, Minix remote conf file etc).
I tried to burn the image with 3 different burning tools:
- v2.2.5.15 (that was bunvled with the FW metioned),
- v2.1.6
- v2.0.6.2 provided by @MINIX - John with the 009 FW
I remember few years ago it worked fine with last FW tool mentioned above to flash FW (back then I had Windows 7), though now I cannot flash any FW, as the burning tool does not connect to my X8-H. I tried with 3 different laptops, different USB 2.0 ports, using the original OTG cable that I had in my X8-H box.
All my 3 laptops are running latest Windows 10.
Minix boots correctly into the recovery mode, as I can see it on my TV screen, while connected to my laptop also, but any of the 3 burning tools do not connect to the box. I tried also running the burning tools either as administrator, or normally.
Is there any trick to flash a FW under Windows 10 that I don't remember?
I see @Villa or @Skynet are still around, so hello guys
Any hints?
Back to the future here on this 3rd revived Minix forum (1st time used it some good years ago)...
I have an "old" Neo X8-H with the "latest" 009FW (20160328), which is still running great. I also have couple of apps which are not working anymore, as they requires Android 5.0 as minimum (like HBO GO).
I also have from the old forum a Probox Lollipop 5.1.1 FW, which seems to be based on the original PROBOX2-EX+-20161221 firmware, that was patched with few things (like theMinix boot logo, Minix remote conf file etc).
I tried to burn the image with 3 different burning tools:
- v2.2.5.15 (that was bunvled with the FW metioned),
- v2.1.6
- v2.0.6.2 provided by @MINIX - John with the 009 FW
I remember few years ago it worked fine with last FW tool mentioned above to flash FW (back then I had Windows 7), though now I cannot flash any FW, as the burning tool does not connect to my X8-H. I tried with 3 different laptops, different USB 2.0 ports, using the original OTG cable that I had in my X8-H box.
All my 3 laptops are running latest Windows 10.
Minix boots correctly into the recovery mode, as I can see it on my TV screen, while connected to my laptop also, but any of the 3 burning tools do not connect to the box. I tried also running the burning tools either as administrator, or normally.
Is there any trick to flash a FW under Windows 10 that I don't remember?
I see @Villa or @Skynet are still around, so hello guys
Any hints?