Official NEO U9-H: 008FW

My MINIX died on me. tried everything even the FW update and i got Romcode/Switch status/Check connect/Enum device error when running the burning tool.
the blue light is on but noting is happening

Are u using the right version usb burning tool? You need to flash it with 2.0.9..
 
Hello Friends, I’m new to this forum. I got new NEO U9-h. Need help on my observations. I had observed that
1.signal lost to tv (HDMI) and screen goes blank for few seconds while changing live channels/ watching online streaming ( not using Kodi)
2. IR remote instructions not processed sometimes like hung for sometime
3. WiFi buffering- device is next to router
4. when I start the device it shows android update/ optimizing apps sometimes
5. is there a minix official Android 7.1.2 to upgrade Available?

pls share your expert advices. Thnx in advance
 
Hello Friends, I’m new to this forum. I got new NEO U9-h. Need help on my observations. I had observed that
1.signal lost to tv (HDMI) and screen goes blank for few seconds while changing live channels/ watching online streaming ( not using Kodi)
2. IR remote instructions not processed sometimes like hung for sometime
3. WiFi buffering- device is next to router
4. when I start the device it shows android update/ optimizing apps sometimes
5. is there a minix official Android 7.1.2 to upgrade Available?

pls share your expert advices. Thnx in advance

1. It's because you have the adaptive refresh rate change enabled. It makes the tv to switch the refresh rate to match the source material fps and the playback smoother. You can turn it off in android settings.
2. It's a basic remote, mostly for initial setup. I recommend buying an airmouse like A2 or A3 or to use a wireless keyboard.
3. Can you connect it with ethernet cable to see if there is a difference?
4. How long does it last?
 
1. It's because you have the adaptive refresh rate change enabled. It makes the tv to switch the refresh rate to match the source material fps and the playback smoother. You can turn it off in android settings.
2. It's a basic remote, mostly for initial setup. I recommend buying an airmouse like A2 or A3 or to use a wireless keyboard.
3. Can you connect it with ethernet cable to see if there is a difference?
4. How long does it last?

Hello Endrjupl, thank you for the response. pls find my updates below for your further suggestions
3. it happened with Ethernet connection with cat6 cable
4. it lasts about 30 sec to a minit
2. i guess I need to set to HDMI level2 to check and feedback the outcome pls
Thank you
Regards,
 
Hi, I am also new to this forum. I bought a minix Neo U9 to stream a club TV app which is running on a TV in our clubhouse. The media player is on 24x7 but is not working fine. After a few days it freezes and has to be restarted by taking off the power and full restart. Is there a way to keep the minix working or to auto restart it once every 24 hours?
Regards, Marcel.
 
Hi, I am also new to this forum. I bought a minix Neo U9 to stream a club TV app which is running on a TV in our clubhouse. The media player is on 24x7 but is not working fine. After a few days it freezes and has to be restarted by taking off the power and full restart. Is there a way to keep the minix working or to auto restart it once every 24 hours?
Regards, Marcel.

In the first instance, try clearing the cache for the main apps you use or clear the system cache/partition.

Failing that, try clearing the data or uninstalling/reinstalling your mainly used apps.

Hopefully one or both of these will help to clear your issues. However, failing that, you may need to consider a factory reset.

Although, let us know if you're still having problems after clearing the cache/data before proceeding with the factory reset & provide additional details if you can, (unless you're happy to just go ahead with a reset). Others may have additional input for you as well :).
 
Hi, I am also new to this forum. I bought a minix Neo U9 to stream a club TV app which is running on a TV in our clubhouse. The media player is on 24x7 but is not working fine. After a few days it freezes and has to be restarted by taking off the power and full restart. Is there a way to keep the minix working or to auto restart it once every 24 hours?
Regards, Marcel.
You could try a scheduler that does not require root and set it to reboot when everyone is tucked up in bed....

For example, this is a powerful piece of software: https://play.google.com/store/apps/details?id=com.llamalab.automate&hl=en

Edit: Ah, I stand corrected, Reboot will require root.
 
I have u9h with community edition rom. But I always get a message android tv remote app has stopped working. I have uninstalled reinstalled factory reset but still the same.
I wish to go back to official few 008 but the usb burning tool will not recognize my box.i have tried everything different PC's different ports and I am using the cable that was provided with the box
So I am looking for another way to revert to fw 08
Maybe an img I can install at boot
Thanks in advance
 
I have u9h with community edition rom. But I always get a message android tv remote app has stopped working. I have uninstalled reinstalled factory reset but still the same.
I wish to go back to official few 008 but the usb burning tool will not recognize my box.i have tried everything different PC's different ports and I am using the cable that was provided with the box
So I am looking for another way to revert to fw 08
Maybe an img I can install at boot
Thanks in advance
as you have CE edition then i asume that you have previously "updated" succesfully already at some time ??
you could aslo try burn card method >> https://theminixforum.com/index.php...are-update-with-burn-card-maker.234/post-1149
 
THANK YOU GUYS!!!


008FW is available to download from below link:

Download Link 1 [MINIX Forum Server]:

https://files.theminixforum.com/shared/firmwares/U9-H-FW008-Android_6.0-20180209-Burning_Tool.zip

MD5 check : c3ee993588febff3183c3b3d53bfbefd
(Please read THIS )




Download Link 2 [Mega]:

https://mega.nz/#!O6YFFCZT!6bE2cFx6PQmOuQsn4hjyHkYVeNxOutT6BYWGe_GfC2I

File Name: U9H_ FW008.rar

File Size: 661.1MB

Firmware installation instructions are attached to this post.

Tutorial Video:
[NEO U9-H installation process same as NEO U1]
 
I'm noticing that the audio is a tiny bit out of sync when watching videos in Kodi (the audio is slightly behind the video). It seems to happen in most videos, not all. I'm not using any receiver or sound system. The U9 is directly connected to the tv and the audio is coming from the tv.

Any idea which setting I need to check to fix this? When I test with CoreElec there is no audio sync issue, so I think there's something wrong with my settings, but I can't seem find it.
 
Any idea which setting I need to check to fix this? When I test with CoreElec there is no audio sync issue, so I think there's something wrong with my settings, but I can't seem find it.
go to the settings cog on the OSD when playing and you can change the audio offset
 
Hi. Need help here. Tried to install firmware but as reached 7% progress, then become error per attached image. Anyone know why?Capture.PNG
 
Hi Folks, I am having issues while burning the ROM. I have tried different versions of the Burning Tool, and different ROMs as well. But it seems to get stuck in the initial stage of burning. I have attached 2 pics. please let me now if anyone has any clue.

I have installed quite a few ROMs with the same method, not sure what the issue is this time. Currently I am running Android TV OS v7.1.2 un official version.

TIA!
 

Attachments

  • Capture.JPG
    Capture.JPG
    120.2 KB · Views: 46
  • Capture2.JPG
    Capture2.JPG
    104.9 KB · Views: 45
Back
Top