Tutorial CoreELEC on the U22

Fixed the problem finally. What I did ?
  1. Go the parameter menu
  2. Choose System
  3. Display
  4. Reset all parameters to defaut
  5. Choose CoreELEC in the same menu
  6. Reset all parameters to deafut
  7. Reboot CoreELEC
  8. After rebooting CoreELEC load normally with the defaut display settings which SDR to HDR is off and HDR to SDR is auto.
  9. After that you can choose to change the resolution, color space, GUI 4K rendering and it will not affect the display for HDR.
Thanks !
 
Fixed the problem finally. What I did ?
  1. Go the parameter menu
  2. Choose System
  3. Display
  4. Reset all parameters to defaut
  5. Choose CoreELEC in the same menu
  6. Reset all parameters to deafut
  7. Reboot CoreELEC
  8. After rebooting CoreELEC load normally with the defaut display settings which SDR to HDR is off and HDR to SDR is auto.
  9. After that you can choose to change the resolution, color space, GUI 4K rendering and it will not affect the display for HDR.
Thanks !
? did you update or fresh install of 9.2.5 from 9.2.4.2 ?
 
Hi Marty,
Yesterday I installed CoreElec (9.2.5) onto a micro SD, followed all start up procedure and "Tada" - there it was, BUT the Minix U22-XJ remote doesn't work apart from switching the box off. Installed a cordless mouse, it worked fine for an hour or so, now it's jerky or doesn't move at all!! Any fixes?
 
Hello,
first installation. I am a total noob. How can I make the standard remote work with CoreElec? I have just bought online the MINIX NEO A3 remote and I am hoping to make it work with CoreElec. Thanks
 
i might install this to get the hd sound from my u22, one thing im wondering is when you press the paper clip in the minix, does this do a factory reset?

thanks
 
i might install this to get the hd sound from my u22, one thing im wondering is when you press the paper clip in the minix, does this do a factory reset?

thanks
No!

Even if you didn't insert the USB/SD card you would be presented with the Recovery Menu where you have the option to factory reset.
 
tried this on 2 different makes of sd cards, it always comes up with no command on an android recovery screen and the options to reboot, shut down and a few others, cant get it to load up to the core elec. not sure if this is normal but when i put the sd card into the minix box, it clicks into place but the card is not held in, i can slide it back out with no resistance? i would have thought it should be held in place when its clicked in?
 
Last edited:
Iv had a quick look at a few films and im getting dd thd, dts hdmaster, the only issue iv found so far is when i shutdown core elec and go back into android the picture setting in android is always 1080p, core elec stays at 4k. Does this happen to everyone or do i have a problem somewhere?

Thanks
 
Last edited:
Back
Top