NEO X8-H Plus Lollipop OS FW: [20170612]

Hi all,

I have been spending a few hours trying to read and fix my Minix Neo X8-X Plus without much luck.

I have tried via the USB_Burning_Tool and hit an UBOOT/Partition boot/Initialize partition/Error Result at about 6%. I have attached a screen.
I have also tried the SD card method without much luck. I have also attached screens.

Any help would be greatly appreciated.
 

Attachments

  • IMG_3770.jpg
    IMG_3770.jpg
    188.6 KB · Views: 49
  • IMG_3771.jpg
    IMG_3771.jpg
    229.3 KB · Views: 56
  • IMG_3772.jpg
    IMG_3772.jpg
    355.9 KB · Views: 51
Hi all,

I have been spending a few hours trying to read and fix my Minix Neo X8-X Plus without much luck.

I have tried via the USB_Burning_Tool and hit an UBOOT/Partition boot/Initialize partition/Error Result at about 6%. I have attached a screen.
I have also tried the SD card method without much luck. I have also attached screens.

Any help would be greatly appreciated.
This may sound stupid but could you try again with the USB burning tool that comes with the firmware, I seem to remember also having issues flashing my X8-H Plus with USB burning tool v2.2.0 but was successful with USB burning tool v2.0.9 :unsure:
 
Hi Marty,

I have just tried the USB burning tool v2.0.9 and I am getting the same error.
 

Attachments

  • IMG_3774.jpg
    IMG_3774.jpg
    586.4 KB · Views: 38
Hi Marty,

I have just tried the USB burning tool v2.0.9 and I am getting the same error.
I also had trouble with the usb tool as it would get up to 95 % and stop. The sd card worked immediately. Maybe try another card just in case ? But having issues from the begging may mean that you have bad hardware ... Good luck
 
I also had trouble with the usb tool as it would get up to 95 % and stop. The sd card worked immediately. Maybe try another card just in case ? But having issues from the begging may mean that you have bad hardware ... Good luck

I have just tried using a different SD card and still getting the same error. Thanks for the suggestion.

It all started with a freeze android screen... then I tried with reboots and pulling plugs in/out (power & HDMI cables). Tested it with different TV..etc. Then I pressed the recover and power buttons together... which resulted in losing the android screen (just black screen)... Maybe I should have googled it before trying to reset it. :(
 
I have just tried using a different SD card and still getting the same error. Thanks for the suggestion.

It all started with a freeze android screen... then I tried with reboots and pulling plugs in/out (power & HDMI cables). Tested it with different TV..etc. Then I pressed the recover and power buttons together... which resulted in losing the android screen (just black screen)... Maybe I should have googled it before trying to reset it. :(
Can you please check the sticker on the bottom of the unit and confirm you have the X8-H Plus, like so:
20190413_095036.jpg
 
I have successfully flashed my box to RC2 image (link 2 in the initial post).
Initially I encountered same error as many of you here where the flashing process stopped half-way.
After reading through the posts, I decided to use the USB burning tool from the image file in link 1 to flash image file RC2 in link 2.
Bingo! Flashing finished successfully.
 
i finished up date v 5.1 same as your Gaiden but i wana know if there's new various after 5.1 or not

see
 

Attachments

  • 16069296868452241728657126290341.jpg
    16069296868452241728657126290341.jpg
    1.8 MB · Views: 81
Does this firmware made anybody to cause stutter in your device while running into Kodi? My id got deleted from Minix though and I suspect my associated post has been removed too. this forum should be liberal to keep addressing our problems since we bought Minix device.
 
My id got deleted from Minix though and I suspect my associated post has been removed too.
We lost Forum in 2018 and it had to be renewed. That will most likely explain where your ID and posts went!
Everybody had to re-register.
 
Hello.Please help.

This link does not work: Download Link 1 [MINIX Forum Server]:

I need the tool to do the process.
 
This may sound stupid but could you try again with the USB burning tool that comes with the firmware, I seem to remember also having issues flashing my X8-H Plus with USB burning tool v2.2.0 but was successful with USB burning tool v2.0.9 :unsure:
this link doesnt do anything for me when i click it, the second link is downloading fine from MEGA, does this include the burning tool also or must i download "LINK 1" to get the burning tool? thanks :)

If link 1 is only link for the burning tool can someone help or provide a working source many thanks
this below is what im talking about from OP
Download Link 1 [MINIX Forum Server]:

https://files.theminixforum.com/shared/firmwares/X8-H_Plus-Android_5.1-20170612-Burning_Tool.zip
 
Back
Top