CP89-HD: firmware V0.0.10

MINIX - DR.Dang

Staff member
Hi All

CP89-HD firmware v0.0.10 is available now, I have uploaded to our cloud.Please download and update as to your requirement.

Please post any bugs or issues found on v0.0.10 FW in this thread.

Changelog
1. Fixed some bugs
2. Enable adjust brightness manually
3. Optimized upgrade mechanism(Not allowed to downgrade to lower version)

OS and upgrade guidance get path:https://files.theminixforum.com/shared/firmwares/CP89-HD/2024-1223-0933_PND-MINIX_V0.0.10.zip

Note: Please read instructions first before you start update, the instruction included in the package.
 
So when i connect my car play the navigation sounds plays in the display i want it to be played in my car stereo how can i do that
 
So when i connect my car play the navigation sounds plays in the display i want it to be played in my car stereo how can i do that
You can set it by below 3 ways
1. Dual Bluetooth mode:
a. Disable FM
b. Enable double Bluetooth
c. Device will reboot automatically
d. Connected your phone Bluetooth to the Bluetooth of both CP89 and Car's
2. Aux mode:
This requires your car support AUX port, Just connect CP89 audio port to Car's audio port with 3.5mm audio cable.
3. FM mode
a. Enable FM
b. Device will reboot automatically
c. Set CP89 FM transmitter and car FM in same channel
 
Hello, I am attempting to update my new unit to 0.0.10. My current app version is MINIX _PND-V0.0.8 with an MCU version of MINX_0.0.7.20240411. I am receiving the following error "Check System Update Fail!" when selecting "System Update". I have followed the steps in the attached document and made sure the files are in the root directory of the UDB drive. What am I doing wrong? If I am somehow already on the latest version, then how can I add my custom boot logo without doing another update?
 
Hello, I am attempting to update my new unit to 0.0.10. My current app version is MINIX _PND-V0.0.8 with an MCU version of MINX_0.0.7.20240411. I am receiving the following error "Check System Update Fail!" when selecting "System Update". I have followed the steps in the attached document and made sure the files are in the root directory of the UDB drive. What am I doing wrong? If I am somehow already on the latest version, then how can I add my custom boot logo without doing another update?
Please reference below video link to upgrade your CP89
 
Hello, I am attempting to update my new unit to 0.0.10. My current app version is MINIX _PND-V0.0.8 with an MCU version of MINX_0.0.7.20240411. I am receiving the following error "Check System Update Fail!" when selecting "System Update". I have followed the steps in the attached document and made sure the files are in the root directory of the UDB drive. What am I doing wrong? If I am somehow already on the latest version, then how can I add my custom boot logo without doing another update?

Is your thumb drive with FAT32 filesystem?

To verify:
Click the start button and then (depending on your operating system) click Computer or My Computer. In the Computer window, right click the drive you wish to check and then click Properties from the menu. In the Disk Properties window, the information is listed next to File system.
 
Hello, I am attempting to update my new unit to 0.0.10. My current app version is MINIX _PND-V0.0.8 with an MCU version of MINX_0.0.7.20240411. I am receiving the following error "Check System Update Fail!" when selecting "System Update". I have followed the steps in the attached document and made sure the files are in the root directory of the UDB drive. What am I doing wrong? If I am somehow already on the latest version, then how can I add my custom boot logo without doing another update?
Hi.
Please follow all above instructions and read carefully
If you are not sucessufull please format the pen drive and try again.
Make sure your pen drive is in good condition.
You can try with another pen drive.
 
Please reference below video link to upgrade your CP89

Hi.
Please follow all above instructions and read carefully
If you are not sucessufull please format the pen drive and try again.
Make sure your pen drive is in good condition.
You can try with another pen drive.
Thank you, for whatever reason my 128 GB would not work, using an older smaller one did, however. Thanks for the suggestions and video.
 
Hi, after this firmware upgrade my device reboots regulary in poor mobile network condition. This can even happen 5 times in a row.

Cheers, Michel
 
Hi, after this firmware upgrade my device reboots regulary in poor mobile network condition. This can even happen 5 times in a row.

Cheers, Michel
You should check the source of its power supply instead. Our firmware did not modify anything related to this part.

The upgrade is to:
1. improve the voice input response of Android Auto
2. added manual adjustment of screen brightness

Other parts were not touched.
 
Back
Top