Driver windows 10 USB not recognized

Jimplus

New member
Hi , i tried to update to 7.1 , had install Amlogic usb burner on two different PC , use the original cable that came with the box. Is any setting on the box need to be done before upgrade ? Is there a way to upgrade vis SD card direct on the unit ?
Thank you for your help
 
Last edited:
Hi , i tried to update to 7.1 , had install Amlogic usb burner on two different PC , use the original cable that came with the box. Is any setting on the box need to be done before upgrade ? Is there a way to upgrade vis SD card direct on the unit ?
Thank you for your help

No, you can't upgrade via an SD card.

No settings required on the U9-H before you flash the device, it will be a complete system wipe & rewrite with 7.1.2 :).
 
At the moment upgrade Via SD card is not possible (U9-H) because we need files and instructions for it... (are not available)

Upgrade Via SD card a PC is also needed.

So in my opinion once we know how to flash with usb burning tool there is no need to use other procedure and it is quicker with usb burning tool.

I know more or less how to upgrade via SD card , i saw videos on youtube and other tutorials... (never tested in any device).

@Jimplus follow flash instructions and see better step 6
 
Last edited:
use usb burning tool (firmware download)

https://theminixforum.com/index.php...91120-community-edition-nougat-firmware.2107/

Instructions:

https://theminixforum.com/index.php...ctions-for-neo-u9-h-with-the-burning-tool.29/

-disable temporarily antivírus/firewall
-dont use usb 3.0 port
-unistall any programs that can block installation
-follow step by step the instructions
-use only Power cable and hdmi cable (connected to minix)

Thank you i'll try again and disable antivirus
 
Hi. I think i understand your question.
Yes using burn card maker (i also have in my NAS other program for SD card) should work in u9h.
I also never tried in my x8h plus and u9h is a different device.

If someone flash with SD card (u9h) i think it is better to know:
the needed files and the correct instructions.
 
In theory you'd just need the same image the USB Burning Tool uses.

Getting the procedure right could be the tricky part.

Ideally we need input from someone who's actually done it to help the OP :).
 
as you both said it was not possible i was really just posing a question !

We have the img file available and burncard maker generates the other files so it "may" work, all the instructions are in the thread.

I vaguely remember reading somewhere (on this forum) that the method could be applied to a U9-H & possibly a U1 as well, but I can't recall anyone actually providing details of how to do it.

It wasn't anything official either, it was another member commenting that it could be done (in theory).

Can you remember where that info was :)?

If it can be done great, I stand corrected & hope the OP can try it if they're still stuck having problems with the USB Burning Tool :).
 
No, maybe in the old forum somewhere ?

Lol, right under our noses ;)!! It was in the X8-H Plus thread you linked :)....

Similarly, you can use Burn Card Maker to update NEO U1 and NEO U9-H firmware. The only difference is that you need to press and hold the power button (not released), waiting for the update percentage to appear automatically.

https://theminixforum.com/index.php...re-update-with-burn-card-maker.234/#post-1356

Certainly worth trying :). Does that work for you @Jimplus?
 
If I use Burn card maker to burn image to an SD card and chose apply update from external SD card ??
Of course I'm not the one that have a lot of computing and programing knowledge. Just wondering
 
Last edited:
Here is the story, I finaly made an SD card with Burn Card Maker, wich does it very fine and succesfully. I install SD card in SD slot , plug the box , I was amazed to see UPGRADING Android logo and then X a big red X on the R2D2 logo . I remove the card and try to boot again than nothing at all ! no more graphic, Dead !!!
I kept cool and decide to find back Official firmware FW007A, Make a Burn Card and try again

Hell yeah it go on and downgrade the box which is work fine now.

Any Idea why the image of 7.1.2 sont install ?? may be corrupted ?
By the way sorry for my english i usually speak french ;)

Thank for your help to find out what is the problem. I also find that windows 10 wont install the driver for the USB Burning tool. it said that it was installed but if i look on , i always see not recognised and a windows driver for the box

Thank you
 
Here is the story, I finaly made an SD card with Burn Card Maker, wich does it very fine and succesfully. I install SD card in SD slot , plug the box , I was amazed to see UPGRADING Android logo and then X a big red X on the R2D2 logo . I remove the card and try to boot again than nothing at all ! no more graphic, Dead !!!
I kept cool and decide to find back Official firmware FW007A, Make a Burn Card and try again

Hell yeah it go on and downgrade the box which is work fine now.

Any Idea why the image of 7.1.2 sont install ?? may be corrupted ?
By the way sorry for my english i usually speak french ;)

Thank for your help to find out what is the problem. I also find that windows 10 wont install the driver for the USB Burning tool. it said that it was installed but if i look on , i always see not recognised and a windows driver for the box

Thank you

Well done :).

You've also confirmed it is possible to flash a U9-H using an SD card too :). Nice one!!

Well spotted @pusb87 :).
 
Back
Top