Firmware

if you havent already try turning wifi off in x35 settings, reboot and then try ethernet

i didnt do any factory resets, just flashed the v003 firmware using the tools supplied with the firmware image on a win 10 laptop

Clean flash or a dirty flash?

(I have a feeling Rui would have carried out a clean flash as per his typical preference so there's a remote chance the two of you could possibly see different results as well. I'm not saying that would happen, just bear it in mind.)
 
if you havent already try turning wifi off in x35 settings, reboot and then try ethernet
I already tested that.

My ISP router is with default settings (DHCP SERVER ENABLE), and all my other devices are working just fine, i don't understand.

What i think:
-maybe is something wrong with the firmware, i don't know or maybe with my test sample
 
Clean flash or a dirty flash?

(I have a feeling Rui would have carried out a clean flash as per his typical preference so there's a remote chance the two of you could possibly see different results as well. I'm not saying that would happen, just bear it in mind.)
I used the recommended flash app settings (i followed the tutorial).
Clean flash (i think it is, i used default settings).
 
i would suggest going back to v001 ( where it worked for you ) but if we dont have access to the v001 firmware your up s**t street :oops:
 
i would suggest going back to v001 ( where it worked for you ) but if we dont have access to the v001 firmware your up s**t street :oops:
I need to check again my NAS for the firmware 001 but i think i have.

Anyway i would like to have an upgrade version and not the need to downgrade.

Edited:
I only have one photo taken from the initial release (firmware 001).
i don´t have the firmware.

@MINIX - Martin can you please provide us the initial firmware (001) ? and if there are newer firmwares (behond 003) can you please provide us?
 
Last edited:
My intention was to suggest downgrade to v001, get ethernet working and then upgrade again.

:ROFLMAO:
every firmware has features that work or not.

i always use ethernet and there are features in the firmware that we can test only with ethernet working:
example wol

Well if there is only one firmware available i will wait for another firmware (previous 001 firmware or update firmware) , no worries :).
I hope my x35-i ethernet card isn´t broken :confused:, but it is strange.

@ArcticWolf can you please test ethernet ? :)
 
Back
Top