Hi Guys, I spent the weekend trying to install coreELEC on my U22 without any success
I've updated the box to last FW, dowloaded the coreELEC v9.2.2 and followed the procedure in the first page. This is what I've done:
- prepared the USB stick (Verbatim 16GB USB2) with Rufus v3.10
- plugged the USB stick in the last USB slot of the box (the one closest to the USB-C port)
- pressed the restore button + power and kept pressed the restore button till coreELEC screen appears
Now I see that coreELEC create the second partition and waiting for the automatic reboot. I reach the reboot countdown from 15s to 0 but then nothing happen. The reboot doesn't kick in and the only way to recover the unit is to unplug the power cable. Rebooting the unit, it found a corrupted filesystem in the second partition so, after 2 mins, starts an automatic filesystem check and repair. After another reboot, the coreELEC splashscreen appears but it remains stuck at that and I have to unplug the power cable to restore the unit. Even changing USB port and perform new process every time produce same result.
I tried with several USB stick with same result. The only way to have the partitioning process work (no reboot stuck) was to plug the USB stick into the USB-C port but after the reboot the second partition has not been seen attached to that port and moving the USB stick into another USB port results again in a stuck of the boot to the coreELEC splashscreen.
Any idea on how to get rid of that?