MINIX - Martin
Staff member
Please note, a factory reset will erase all saved data, content and settings on your NEO Z83-4.
1. Attach a keyboard to the NEO Z83-4 and start/boot the device by pressing down the power button.
2. Press F9 key on the keyboard and you shall be able to see reset-1.jpg, then select “Troubleshoot”.
3. Select "Troubleshoot" in reset-1.jpg.
4. Follow these steps:
"Reset this PC" > "Remove everything" > "Fully clean the drive" > "reset".
Check out these steps in the attached pictures.
The whole process would take approximately 2 hours.
1. Attach a keyboard to the NEO Z83-4 and start/boot the device by pressing down the power button.
2. Press F9 key on the keyboard and you shall be able to see reset-1.jpg, then select “Troubleshoot”.
3. Select "Troubleshoot" in reset-1.jpg.
4. Follow these steps:
"Reset this PC" > "Remove everything" > "Fully clean the drive" > "reset".
Check out these steps in the attached pictures.
The whole process would take approximately 2 hours.