Minix Neo X8 Brick Help !!!!

G

gillxcess

New member
Hi
My Minix Neo X8 is not booting.
I was updating it with usb burning tool.
Process was complete 100% for usb burning tool. Then it was stuck at booting screen. I tried to re do it but it stops at 6%. I tried memory card method, it start but then stops with red x signe.
Please see attached photos.
Any help will be appreciated
Thanks All20181204_171245.jpg20181204_171418.jpg
 
gillxcess said:
Hi
My Minix Neo X8 is not booting.
I was updating it with usb burning tool.
Process was complete 100% for usb burning tool. Then it was stuck at booting screen. I tried to re do it but it stops at 6%. I tried memory card method, it start but then stops with red x signe.
Please see attached photos.
Any help will be appreciated
Thanks AllView attachment 207View attachment 208
Click to expand...
What is the Fw you've installed ?

Kar

Verstuurd vanaf mijn SM-G950F met Tapatalk
 
KAR said:
What is the Fw you've installed ?

Kar

Verstuurd vanaf mijn SM-G950F met Tapatalk
Click to expand...

Hi There
I installed it on neo x8
X8H_PLUS_LOLLIPOP_RC2.rar

I tried other memory card method.
It boot but no success in installing.
Please see photo
Thanks
 

Attachments

  • IMG-20181207-WA0015.jpg
    IMG-20181207-WA0015.jpg
    305.8 KB · Views: 14
gillxcess said:
Hi
I find it out after, installing it. Do we know if there is any fix for it.
I feel like on board memory chip is firied or dead.
I did not do the full research.

Thanks for your help
:)
Click to expand...
you should re-try installation of the correct firmware for your device
 
Yes. That's why I ask which Fw. You have the x8h and you are trying the x8hplus Fw which will result in a failure.

Use the x8h one and try again.

Kar

Verstuurd vanaf mijn SM-G950F met Tapatalk
 
gillxcess said:
Hi
I find it out after, installing it. Do we know if there is any fix for it.
I feel like on board memory chip is firied or dead.
I did not do the full research.

Thanks for your help
:)
Click to expand...
Installing the wrong Fw will not result in a fried chip.

Kar

Verstuurd vanaf mijn SM-G950F met Tapatalk
 
pusb87 said:
you should re-try installation of the correct firmware for your device
Click to expand...


Hi

I tried at least 20 times with 7 different stock FW for Neo X8 with usb tool and it method.

About 20 times with creating memory card and 10 times tried with adding three files to memory card.

Usb method errors at 6%
Memory card method says E:/ cant mount

So far no success

Thanks
 
I also tried two different computers and three different usb cables and three different versions of usb tools.
Thanks
 
You must log in or register to reply here.
Back
Top