MINIX NGC-1: BIOS v1.7

#4
Tried as above guidance but errors appered and re-typed as I did below and succeeded.
#5. should be corrected as below for NGC-1. above guidance is for neo-z83.
5. Type command fs3: and then type ls command to check the BIOS files, and you can see afuefix64.efi and BS00B170.BIN are listed.
Type the following command to perform the update:
afuefix64.efi BS00B170.BIN /p /b /n /x
Thanks to Villa for guidance.
 
#5
Tried as above guidance but errors appered and re-typed as I did below and succeeded.
#5. should be corrected as below for NGC-1. above guidance is for neo-z83.
5. Type command fs3: and then type ls command to check the BIOS files, and you can see afuefix64.efi and BS00B170.BIN are listed.
Type the following command to perform the update:
afuefix64.efi BS00B170.BIN /p /b /n /x
Thanks to Villa for guidance.
5. [and then type "Is" command to check the BIOS files], this should be wrong command.
correct command is: type "dir" command to check the BIOS files.

fs3: is the removable HardDisk path. It may be in other paths. eg. fs2: or fs1:
 
#9
Decided to upgrade my NGC-1 to 8Gb. A time ago I bought a Crucial SODIMM but it wouldn't work in the NGC-1; the computer wouldn't even boot to the BIOS.

So I reckoned that this SODIMM for some reason had a defect. So I bought the 8Gb. version of the 4Gb. SODIMM (Samsung) that was installed from the factory, but it also wouldn't work at all.

Upgraded the BIOS to version 1.3 and still no success. Took the plunge and upgraded to BIOS 1.7 and lo and behold... it works.

So, that is one thing that BIOS 1.7 changed (at least for me). Happy camper now. Upgraded to 8Gb. RAM and 256Gb. SDD.
 
#10
Hola.
Estoy intentando actualizar desde Windows 10 la BIOS. Pero los comandos indicados no son válidos.

Por favor, ayudarme.

Gracias

Hi.

I am trying to update the BIOS from Windows 10. But the indicated commands are not valid.


Please help me.


Thank you
 
Top