MINIX U9-H only MINIX Logo on start

Zorann53

Member
After many years of satisfied use, I now have a problem with MINIX U9-H.
When I turn on the MINIX N9-H, the blue led and the green MINIX-Android logo appears for a moment and after 5 seconds the message "No signal" appears on the screen. The blue light stays on. It does not go out. I changed the HDMI inputs on the TV, I changed the HDMI cables, I changed the TV ... It's always the same story.
Is there any help? Thanks!
 
Thanks to all of you. Not all attempts solved the problem. I'll have to replace it with a new one!

Not necessarily. (Chances are the device itself is OK & it's just a serious software glitch that's caused this. It's been an issue that has been reported with some repetition in the past, although I certainly wouldn't go as far as to label it as common.).......

...If you attempted the flash procedure as previously outlined above while only erasing the bootloader & that also failed, then you could still try a standard/routine flashing procedure!!!

What error did the USB burning tool display when you attempted flashing & only erasing the bootloader of your U9-H?

Which version of the USB burning tool did you use to carry out the flash too?


There's a fair chance your device can in fact be recovered, (albeit obviously wiped clean). However, if you're not prepared to even try, then be my guest & purchase another ;)!!
 
Back
Top