Mouse cursor speed of A3 PRO

MINIX - Ken

MINIX - Ken

Staff member
Volume Minus + OK -> 3 seconds -> slowing down the cursor moving speed
Volume Plus + OK -> 3 seconds -> increase the cursor moving speed

There are 4 levels, default is set at level 2.
So you may slow down the cursor by 1 level, or increase it by 2 more levels.

(Flashing Green LED x 3 times meaning that it's adjusted once, no more flashing means it's already the highest/lowest)
 
Please note this is in addition to the Pointer speed setting in Settings!

Which can be found here:
Settings
Device Preferences
MINIX Settings
More settings
System
Languages and input
Advanced
Pointer speed
 
Villa said:
Please note this is in addition to the Pointer speed setting in Settings!

Which can be found here:
Settings
Device Preferences
MINIX Settings
More settings
System
Languages and input
Advanced
Pointer speed
Click to expand...
Yes, this one is system level (to all connected cursors), the one I posted is hardware adjustment for its own ;)
 
After upgrading to the latest firmware of the U8-Ultra, the A3 PRO Wireless Air Mouse occasionally freezes, making the cursor unresponsive, although all other features remain operational. To resolve the issue, I need to remove and reinsert the batteries.

Could you please advise on how to recalibrate or reset the Minix A3 PRO Wireless Air Mouse? Additionally, is there a PDF manual available for the remote? Thank you.
 
baguera said:
After upgrading to the latest firmware of the U8-Ultra, the A3 PRO Wireless Air Mouse occasionally freezes, making the cursor unresponsive, although all other features remain operational. To resolve the issue, I need to remove and reinsert the batteries.

Could you please advise on how to recalibrate or reset the Minix A3 PRO Wireless Air Mouse? Additionally, is there a PDF manual available for the remote? Thank you.
Click to expand...
the recalibration is fully automatic, every time it wakes up, or when new batteries are installed, just let it lay on a flat surface, and it shall recalibrate by itself.

Did you press the microphone button when it "freezes", it takes 3 seconds for the airmouse to be usable again after each voice input section, as the two features are utilizing the same channel to transmit data.

Also, pressing UP/DOWN/LEFT/RIGHT buttons shall disable the cursor.
 
Dear Ken,
I haven't pressed any of the buttons mentioned above.
This happened when the Remote is on the side and not in use for some times. After trying to activate the air mouse feature. either does not work, or the curser will move erratically on its own or in a jerky movement too.
 
baguera said:
Dear Ken,
I haven't pressed any of the buttons mentioned above.
This happened when the Remote is on the side and not in use for some times. After trying to activate the air mouse feature. either does not work, or the curser will move erratically on its own or in a jerky movement too.
Click to expand...

What’s the battery % left?


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top