NEO J50C-4 Max: BIOS v0.24 [20210827]

FYI....

...Any users updating their BIOS to v0.24 as above.

Please note: v0.24 BIOS, the eMMC is disabled by default


Obviously, users that still require use of the eMMC will need to enter the BIOS & re-enable it after the v0.24 update procedure has been completed ;).
 
I have downloaded the link and followed instructions however nothing happens?

What is your existing BIOS version?

So, you've definitely?....

1. Extracted the files from the .7z archive. (Are you using the 7 Zip app, or another program such as WinZip or Winrar?)

2. Placed the four extracted files below into a single folder if they're not already after extraction.

- AFUWINx64.exe
- amifldrv64.sys
- 0B024.BIN
- update.bat

3. Right click on the update.bat file & choose "run as administrator".

But still, absolutely nothing happens at all? (No windows opening & immediately closing? No critical error dialog popups or sounds either?)

Any additional information you can provide as to what you have or haven't done or tried, as you're not exactly providing a lot to go on ;)?
 
@Huxey1

Also check any firewall applications arent blocking execution as i had this very recently and i was stumped for a bit.

Obviously, users that still require use of the eMMC will need to enter the BIOS & re-enable it after the v0.24 update procedure has been completed
If you want to run windows from Emmc then
1st you have to enable it in the BIOS and save and exit and then let it boot into windows.
2nd and then you need to go ino the bios again on restart to select the boot manager.

At least thats what i had to do because in the 1st step although EmmC is enabled it didnt give me the option to slect it as 1st boot device.
 
I have downloaded the link and followed instructions however nothing happens?

I had this issue too and i resolved it this way :
copy all files in one folder
open a shell in administrative mode
go into the created folder and type update.bat (don't double clic on it).
the process will start
 
Hi everyone, I bought a new J50-4C max two days ago and is trying to upgrade the BIOS to o.24 project version. I copied and pasted the relevant link in internet. It was worst that I could not see anything as I was directed to Adobe Reader. The error message said it could not read the file. Now I am still tangling with this upgrading. See if anyone can help.
 
The below link does not work:
Oops! We ran into some problems.
The requested page could not be found.

Where can I get a J50C-4Max bios for win 11 ?

Thx
Works for me, try right mouse click, Save link as...
 
I have got it to work using a Windows PC - Might be a good idea to state that it will not download on Mac/Safari.
 
The instruction file included in the bundle should be updated - I had same problem as Villa and resolved it same as Skynet. I opened a cmd shell and cd'd to the folder and ran update.bat command. This popped another cmd window to run the bat which did take a minute or 2 to complete, but you can see it's activity, so know wht's going on and when it completes.
 
Back
Top