NEO U22-XJ: 003A FW [20200503] - Bugtracker

Status
Not open for further replies.
For me it's an issue that it doesn't refresh the file list on a flash drive during startup.
If i remove the flash drive while the unit is off and delete/add data to it, after I reinsert it and restart the minix it will display the old file list.
 
For me it's an issue that it doesn't refresh the file list on a flash drive during startup.
If i remove the flash drive while the unit is off and delete/add data to it, after I reinsert it and restart the minix it will display the old file list.
Well generally the good advice offered whether it be android or windows is to safely eject removable drives, likewise I would suggest the same for you:
shot_2020-05-18_21-59-54.png
shot_2020-05-18_22-00-35.png
 
A few things that still lingers with latest 003a firmware:
1. HDMI loses connection upon restart (not always) or even shutdown and then power on (gives logo screen and then loses picture) - workaround is to pull HDMI cable out and re-plug it in.. :cautious:
2. You can install SuperSU to get root permission management, but it seems that if you choose to update the SU binary, it will brick the box upon reboot. It did for me. Had to re-flash it.
3. Root is temporary. lasts only as long as the session is, and even though the switch stays on after reboot, the root is not active. It also seems to be a broken, permissionless root.
4. PCMark work 2.0 benchmark runs all fine, until it gets to the results page which it shows blank and freezes (can only exit using the Home button)

Please fix all this. thanks.
 
Well generally the good advice offered whether it be android or windows is to safely eject removable drives, likewise I would suggest the same for you:
View attachment 2074
View attachment 2075
I almost never use that "function", never had a problem, I use computers with USB and win since they appeared on the market .
Thank you but I don't think that's the problem because if I remove and reinsert it while the unit it's on it "updates" the files.
Probably it just doesn't refresh after startup if you don't remove.
 
I almost never use that "function", never had a problem, I use computers with USB and win since they appeared on the market .
Thank you but I don't think that's the problem because if I remove and reinsert it while the unit it's on it "updates" the files.
Probably it just doesn't refresh after startup if you don't remove.
What file manager are you using? I use FX Explorer and if I pull down on the page with the airmouse it does a page refresh, look for this option in the file manager you are using.
 
Having problems with the usb3 ports they can't read seagate ext. 2 gb hard disks ?

How is your drive formatted? (NTFS, FAT32, etc?)

Desktop type HDD with its own power supply or the unpowered/mobile type?

A single 2 TB HDD, or multiples thereof?

(Not always obviously, but the 2TB drives around these days often tend to be the unpowered mobile variety.... Have you tried connecting them via a powered USB hub? Conversely, if it is the type with its own power, have you tried connecting them with an unpowered USB hub?)
 
How is your drive formatted? (NTFS, FAT32, etc?)

Desktop type HDD with its own power supply or the unpowered/mobile type?

A single 2 TB HDD, or multiples thereof?

(Not always obviously, but the 2TB drives around these days often tend to be the unpowered mobile variety.... Have you tried connecting them via a powered USB hub? Conversely, if it is the type with its own power, have you tried connecting them with an unpowered USB hub?)

Thanks that is great advice but i deep scanned the disks and the file system was damaged. i think its best to remove them properly even if the hd bios is set to quick removal. not sure if a powered hub works with this model but will try a few things.
 
Ah, nice and quiet, a sign we have most of the bugs reported.....

A gentle reminder, please read the second post of this thread with all the accumulated bug reports to make sure your issue is not already reported:
https://theminixforum.com/index.php?threads/neo-u22-xj-003a-fw-20200503-bugtracker.2797/post-22080

Albeit we're silent, we're still looking forward for the new fw version and the fixes - while we're still using the U22 with the workarounds (wherever it's possible). :)

Thanks for sum up all the accumulated known issues!
 
the new firmware is good just a few suggestions to make it better is 1. Double Tap Home to open up recents apps, 2. add vulkan support (GT King Only device that supports it as of right now, 3. change dpi to 240 ... (I can do this myself no problem but in general its better for the apps to be more compatible for everyone those are my thought on 003 firmware otherwise its really good been testing
 
Apologies, I should have clarified this earlier.
003A FW is available to download and install via OTA from all previous firmware versions (001FW, 002FW or 003FW).
If you manually install 003 FW you'll be able to update to 003A FW via OTA (the only difference between manually installing 003 FW and OTA 003A FW is the latter includes the OTA problem fix).
Hi John, this afternoon I received my new Minix Neo U22-XJ and the backlit Minix Neo A3. Before launching it, I would like to have been reading in the forum to make the most important adjustments such as updates. But it is still not completely clear to me correct me if I'm wrong. If I update with OTA 003A FW is it the same as if I manually install 003 FW. Only that with OTA 003A FW I save having to update OTA 003A FW after having manually installed 003 FW? I would like to know to save the manual installation although if it works the same as in my Minix Neo U1 I do not think it will have a problem.
Thank you very much and greetings to you and that cast of nonprofit collaborators who make this forum so functional.
I apologize for my previous behavior, it is a bad time that we have had to live and sometimes you lose the north.
 
Hi John, this afternoon I received my new Minix Neo U22-XJ and the backlit Minix Neo A3. Before launching it, I would like to have been reading in the forum to make the most important adjustments such as updates. But it is still not completely clear to me correct me if I'm wrong. If I update with OTA 003A FW is it the same as if I manually install 003 FW. Only that with OTA 003A FW I save having to update OTA 003A FW after having manually installed 003 FW? I would like to know to save the manual installation although if it works the same as in my Minix Neo U1 I do not think it will have a problem.
Thank you very much and greetings to you and that cast of nonprofit collaborators who make this forum so functional.
I apologize for my previous behavior, it is a bad time that we have had to live and sometimes you lose the north.

All you need to do is let the device update OTA to FW003A!!

Absolutely no need for you to even consider doing anything manually at this point at all ;)!!
 
I have problem playing meWATCH program. There is a message display. This device is not enable to play this copyright program. Pls try again. Error code: 9002. I have no problem with U9-H. Pls advise. thank you
 
I have problem playing meWATCH program. There is a message display. This device is not enable to play this copyright program. Pls try again. Error code: 9002. I have no problem with U9-H. Pls advise. thank you
Do you have the root switch enabled? If so disable it and try again, if it is already disabled then this has been reported.
Screenshot_20200529_100413.jpg
Screenshot_20200529_100858.jpg
 
Hi there and thanks for the update to FW003A still there is an issue with google chrome or bluetooth when try loading any file its freeze and reboot some times also there is problem with dolby vision also hdr or deep color if you have smart tv i tray all kind of setting in both minix also my smart tv
so i turn it off on minix thanks again wish you all the best by the way i try all this on two minix devices i just receive yesterday .
note : if you got black screen turn deep color off on your tv
 
I'm delighted with my U22-XJ, but when I occasionally try to use the 3.5 mm audio jack for headphones I get no sound.

The answer I have found is to reboot it, and then my headphones work fine, and I can unplug, and plug them back in repeatedly with no problem, and repeatedly swap back and forth from headphones to the sound system I have plugged into the 3.5 mm audio jack on the 27" computer monitor I use as a TV, which is the only device I have connected by the Minix supplied hdmi cable to the U22-XJ hdmi port.

Other than the power supply, the only other thing I have plugged into the box is the Minix Neo A3 remote usb receiver in one of the usb ports.

However, days later when I plug my headphones into the audio jack on the U22-XJ again, I get no sound from it, and have to reboot it to restore the audio jack output. This never happened on my U9-H.

Would be grateful for a solution. Thanks.
 
Last edited:
I bought an application for viewing lptv, Televizo, installed and premium functions are not activated, everything is fine on the other console. Check it out.
 
Status
Not open for further replies.
Back
Top