NEO X8, X8-H, X8 Plus - 009FW (20160328)

Marty

Moderator
Hello.

My problem is that I can not update my X8-H with the software USB Burning Tool.

I've tried all versions from v2.0.1 to v2.1.6, including the 2.0.9 which is being used in your guide and 2.0.6 from the download nothing worked out.
After holding recovery button+ power button for 11seconds, Android system recovery starts and the Device status in USB Burning Tool is empty.

I am currently trying to update with external usb flash/SD card but I want to connect with PC and Cable!

Edit update: --Install /udisk...
Start copy /udisk/X8_X8PLUS_X8H_FW009.zip to /tmp/sideload
Finding update package
Opening update package
verifying update package
E:footer is wrong
E:signature verification failed
Installation aborted

Soooo yeah...


Please help me connect properly. I've tried win 7 (2 dif PCs) and 1 laptop with win 10.

Release: KOT49H.20160328 is not even close enough to Lolipop, where is the 5.1 one??
 
Last edited:
Hello.

My problem is that I can not update my X8-H with the software USB Burning Tool.

I've tried all versions from v2.0.1 to v2.1.6, including the 2.0.9 which is being used in your guide and 2.0.6 from the download nothing worked out.
After holding recovery button+ power button for 11seconds, Android system recovery starts and the Device status in USB Burning Tool is empty.

I am currently trying to update with external usb flash/SD card but I want to connect with PC and Cable!

Edit update: --Install /udisk...
Start copy /udisk/X8_X8PLUS_X8H_FW009.zip to /tmp/sideload
Finding update package
Opening update package
verifying update package
E:footer is wrong
E:signature verification failed
Installation aborted

Soooo yeah...


Please help me connect properly. I've tried win 7 (2 dif PCs) and 1 laptop with win 10.

Release: KOT49H.20160328 is not even close enough to Lolipop, where is the 5.1 one??
There is no Android 5.1.1 Lollipop FW available for NEO X8-H.
NEO X8-H and NEO X8-H Plus use different CPUs, so require different firmwares.
NEO X8-H shall remain on its existing Android 4.4.2 KitKat OS firmware.
 
Hi,

i have the same issue as above, i was not able to connect my minix to the PC, tried all driver updates and failed. do you have any recommendation please?
 
May I ask: will there be an "ZIP from SD" update or OTA available that keeps existing settings?
I am unable to use the "Worldcup" and any other USB Burning Tool version ...
 
Need some help folks. I followed the instructions here to download both the USB Burning tool and the RC2 file. My problem is opening the file using the burning tool. First, I can't find it on my PC. WHen you look it up in File Explorer, it's there. But when you open via USB Burning tool, it's not. So I type the X8-H in the search area and it comes up. But when I press "OPen", it says, "Parse Burning Image Fail".

Any suggestions?
 
Need some help folks. I followed the instructions here to download both the USB Burning tool and the RC2 file. My problem is opening the file using the burning tool. First, I can't find it on my PC. WHen you look it up in File Explorer, it's there. But when you open via USB Burning tool, it's not. So I type the X8-H in the search area and it comes up. But when I press "OPen", it says, "Parse Burning Image Fail".

Any suggestions?
no problem here using the file downloaded from the mega link
make sure you allow the install of the world cup drivers and that you import the correct .img file

Capture.JPG
 
Need some help folks. I followed the instructions here to download both the USB Burning tool and the RC2 file. My problem is opening the file using the burning tool. First, I can't find it on my PC. WHen you look it up in File Explorer, it's there. But when you open via USB Burning tool, it's not. So I type the X8-H in the search area and it comes up. But when I press "OPen", it says, "Parse Burning Image Fail".

Any suggestions?
Which device do you have?

RC2 file is only fo the X8-H Plus!
 
Hello,
Is any firmware upgrade for NEO X8 PLUS (existing ANDROID 4.4.2 - KERNEL version 3.10.33 - BUILD Number KOT49H.2016030628)
 
not able to update firmware for my neo x8-h plus, plugged in usb from box to computer and the burning program does not connect. Did it exactly like john in his video but no luck. can i get help from anyone. thx
 
USB Burning tool installed, can locate image, but no connection via usb. Tried multiple cables and USB ports ? Suggestions ? Minix X8 Plus
 
009FW (20160328) is available to download from below link:

Download Link 1 [MINIX Forum Server]:

https://files.theminixforum.com/sha...X8H-FW009-Andorid_4.4.2-2015-Burning_Tool.rar

Download Link 2 [Mega]:

https://mega.nz/#!buJiWaKY!_3jtcxZB22z1GGyDniMgXtvrRsHf7EV5YO4ZuJUaX9g

Firmware installation instructions are attached to this post.

Tutorial Video:
[NEO X8, X8-H, X8 Plus installation process same as NEO X8-H Plus]

Hello, I have a X8-H with the stock FW (i think it is the 002). Can I use this method to update to 009 directly or do i have to install all previous sequentially (....006,007,008) before updating to the latest one?

Thank you for clarifying.
 
Hello, I have a X8-H with the stock FW (i think it is the 002). Can I use this method to update to 009 directly or do i have to install all previous sequentially (....006,007,008) before updating to the latest one?

Thank you for clarifying.
yes , you can install the latest version directly using the USB burning tool
 
Back
Top