Official Release X7 Kitkat 250 ( february 8th 2016 )

Thank you for your interest. problem cable. Cable change.this little cable name went.
 

Attachments

  • 20190917_011221.jpg
    20190917_011221.jpg
    985.9 KB · Views: 113
  • Like
Reactions: KAR
Download Link 1 [MINIX Forum Server]:

https://files.theminixforum.com/shared/firmwares/x7-rk3188-250.rar

Download Link 2 [Mega]:

https://mega.nz/#!DmxVVQTT!TJ9ibyeAGwUnYjDJMZyRVQVaCUNs9ifMQ_iwVIYJOOA

File Name: x7-rk3188-250.rar

File Size: 520.4MB

Firmware installation instructions are attached to this post.
My X7 had storage issues and half the apps disappeared. Tried a factory reset - better, but still not right - things missing, among them the settings app. So I followed these instructions. Perfect! All is back to normal. Thank you very much!
 
hi gladdy to see my minix x7 is still alive years and years, due personals problem was storage in my cabinets, i reed this version is cable to run ubuntu and debian, but booted from sd card, if is posible installed? sorry if this is a out topic, is posible to have dual boot, linux and android?
 
hi gladdy to see my minix x7 is still alive years and years, due personals problem was storage in my cabinets, i reed this version is cable to run ubuntu and debian, but booted from sd card, if is posible installed? sorry if this is a out topic, is posible to have dual boot, linux and android?
No not possible I think

Kar

Verstuurd vanaf mijn SM-G960F met Tapatalk
 
help i cant start in recovery try to boot from sd with a new kernel instalation, was stuck and stupidily disconected from power, and now dont turn on, can i open and conecct to ttl or something o i bricked?
 
i opened and put on auto-start changing the jumper, try to reconect to recovery mode but windows 10 dosnt recognize even if i choose win 10 drivers, any guides? or maybe doing in linux? the led on power dosnt turn on, i know there is a metod jumping pin 8 and 9 on the chip,
thanks
 

Attachments

  • win10error.png
    win10error.png
    7.5 KB · Views: 71
  • win10error2.png
    win10error2.png
    14 KB · Views: 71
  • win10error2.png
    win10error2.png
    14 KB · Views: 60
Have you installed a new bootloader as well?

Kar

Verstuurd vanaf mijn SM-G960F met Tapatalk
 
please help me. i have a minix neo x7 (ver 4.2). i lost micro usb cable, just have otg cable. i have bought a cable usb to usb. When i try to connect with my laptop win 7 (setup rockchip driver assistant v4.4): connect power cable, connect minix with usb to usb cable with laptop (and another way: minix - otg cable - usb to usb cable - laptop). Then, i push and hold the restore button + click power button. But nothing release, laptop have not a signal.
please tell me what can i do? Can i up firmware wasser 3.0.6 by usb?
sorry because my english not well... hixx.
 
I wasted too much time on this process. I see many users have the same complaint. The software available is not compatible with windows 10.
My time is more valuable than spending it trying to update this not user friendly peice of junk.
 
I wasted too much time on this process. I see many users have the same complaint. The software available is not compatible with windows 10.
My time is more valuable than spending it trying to update this not user friendly peice of junk.
Time is valuable yet still spends it complaining on the forum rather than asking for assistance and making efficient use of time… :rolleyes::unsure::whistle:
 
I wasted too much time on this process. I see many users have the same complaint. The software available is not compatible with windows 10.
My time is more valuable than spending it trying to update this not user friendly peice of junk.
You have received support for an ancient device from users on this forum, yet you still complain instead of trying out the solutions mentioned. How many brands would give help for a device no longer in production, several years later? Minix does.
 
Hi all,

I don´t know if someone has the same problem I have now. I have recently installed the last version (250) into my Minix neo x7 and everything seems to run well. My problem is when I try to cast using airpin with my Iphone to the Minix.

The thing is that only the content in SD quality is fluid because when I put full hd 1080p or 720p the video has quite lag regarding with the audio and the video is slow itself as well.

I have also make some tests with the Ipad pro (last model) thinking the problem had something to do with my Iphone. Both, Iphone and Ipad has the last ios version put on them with Itunes (not wifi update) so the Iphone and Ipad should not be the problem. I think the problem is on the Minix thinking the box is not able to play video in high quality using airplay. I undestand the last Minix version should do this properly.

Could someone write if they have been able to run the minix with high quality video using airplay with ios device?

Thanks a lot in advance
 
i ask please your help,i am not able to instale the firewall in my Neo x7, all files that download does not come full,and when the installation says error, that firewall was not loaded, can semeone help me?
 
Hi, sorry if this is not the place for this question.
Can someone tell me what is the XBMC version that is installed in the Official Release XT Kitkat 250?
Thanks in advance!
 
Hi Guys....Has anyone find a way to update firmware on minix neo x7 in Windows 10 Pro 64 bit config? My laptop does not recognise the device eventhough it says I have the drivers installed. Please assist.
 
Hi Guys....Has anyone find a way to update firmware on minix neo x7 in Windows 10 Pro 64 bit config? My laptop does not recognise the device eventhough it says I have the drivers installed. Please assist.

i just tried to update on Win 10 laptop 64bit.
Driver package 4.5 and 4.6 - both did not work, underdevice manager it shows as: Unknown USB device (device descriptor request failed).

and when i try to do a manual update driver it says latest driver is already installed.
so i went to my win10 PC - same results.

any help would be appreciated.
thanks.
 
Last edited:
Back
Top