Proxmox V8.xx Installation

Skynet

Skynet

Administrator
Proxmox V8.xx is fully compatible with Z100, giving a fast and quiet virtualization and container solution.

Download free version here : https://enterprise.proxmox.com/iso/proxmox-ve_8.2-1.iso
Prepare a USB pendrive with Rufus and boot Z100 with it.
Follow the instructions.
Better to choose a fixed IP address
Reboot and note the given web address.
Connect to Proxmox with a navigator and the given web address.

For free updates try this : https://poweradm.com/enable-pve-no-subscription-proxmox/
 
hi, friend! I see that you have installed proxmox, have you been afraid to configure something in the BIOS? I am not able to install proxmox, when the proxmox configuration boot screen appears, the PC restarts... thanks friend and greetings!!
 
Try Ventoy instead of Rufus

Ventoy

Ventoy is an open source tool to create bootable USB drive for ISO files. With ventoy, you don't need to format the disk again and again, you just need to copy the iso file to the USB drive and boot it.
www.ventoy.net www.ventoy.net
 
pxr5 said:
Try Ventoy instead of Rufus

Ventoy

Ventoy is an open source tool to create bootable USB drive for ISO files. With ventoy, you don't need to format the disk again and again, you just need to copy the iso file to the USB drive and boot it.
www.ventoy.net www.ventoy.net
Click to expand...
and use at least 1.097 or better version

  • 2024/01/24 --- 1.0.97 release
  1. Add support for FreeBSD 14.0. (#2636)
  2. Fix Proxmox 8.1 boot issue. (#2657)
  3. Fix VTOY_LINUX_REMOUNT option does not work with latest linux kernel version. (#2661 #2674)
  4. Fix the VentoyPlugson issue that default_file value is wrong for more than 10 theme files. (#2608)
Click to expand...
 
Probé con rufus, con balena etcher y con ventoy, el resultado siempre es el mismo, aparece la interfaz de instalación, pero no responde el teclado ni el mouse, se reinicia a los 10/15 segundos, lo estoy instalando desde un USB 3.0, esta noche probaré con un USB 2.0, a probar... Probaré la configuración que me dices con ventoy, a ver si hay suerte, Gracias por la ayuda!
 
javi1980 said:
Probé con rufus, con balena etcher y con ventoy, el resultado siempre es el mismo, aparece la interfaz de instalación, pero no responde el teclado ni el mouse, se reinicia a los 10/15 segundos, lo estoy instalando desde un USB 3.0, esta noche probaré con un USB 2.0, a probar... Probaré la configuración que me dices con ventoy, a ver si hay suerte, Gracias por la ayuda!
Click to expand...
I tried with rufus, with balena etcher and with ventoy, the result is always the same, the installation interface appears, but the keyboard and mouse do not respond, it restarts after 10/15 seconds, I am installing it from a USB 3.0, tonight I will try with a USB 2.0, to try... I will try the configuration you tell me with ventoy, to see if I am lucky, Thanks for the help!
 
You must log in or register to reply here.
Back
Top