U22 XJ Wifi wont turn on

James_S

Member
Hi can anyone shed some light on why the wifi wont turn on - Neo U22 XJ
I click it to on - it hangs there for about 5 secs then goes off......
Any help appreciated.
James
 
You can reflash your box and save reloading your apps individually by doing the following:

" Run USB burning tool (V.2.2.0) with only the "erase bootloader" activated when you are reinstalling the same firmware that you had, or updating a firmware version . And it is the only way to keep what you had in the internal disk, especially if you failed to back it up. And you should be able to run it with no problems."

Try that and see what happens.
 
Cheers Dak
I will give that a shot.
Thanks for that.

Quick question ... can i create my own image of all apps installed on one box and copy that to another identical box?

Cheers
 
The way I did it was:

Backup all apps using ES explorer or another file manager.

Using the ES explorer or any file manager, move or copy the backups from internals storage to SD card that is formatted as external.

Insert SD card into other device and " install".

Or, simply make a backup direct to your SD card. And insert into new device. And then install the apps.

There may be other solutions that some may offer. But I find that simple enough to do.

Hope that helps.
 
Hi can anyone shed some light on why the wifi wont turn on - Neo U22 XJ
I click it to on - it hangs there for about 5 secs then goes off......
Any help appreciated.
James
You need to be sure:
-first that your router is working well

Some things you can do:
-restart your router/U22-XJ
-try wifi with another device (pc for example)
-check your router settings and leave your u22xj with wifi default settings (DHCP)
 
@James_S If you decide to reflash the firmware:
-be sure if you have U22-XJ (older model) and not U22-XJ max (newer model)
-flash the correct firmware and use default usb burning tool settings.
Of course you need to save your data before (all your data will be erased).

Note:
I dont advice you to use usb burning tool with only erase bootloader selected.
 
@notrui Quote:
Note:
I dont advice you to use usb burning tool with only erase bootloader selected.

Why do you not recommend that process?
I did have issues in the past not using usb burning tool default settings.
So i decided that the best procedure is default settings.
It is my opinion and it saves me time.

After you use usb burning tool (with default settings that is also recomended by minix) you have bugs in the firmware then you know that the problem is not the method you flashed earlier.
 
I did have issues in the past not using usb burning tool default settings.
So i decided that the best procedure is default settings.
It is my opinion and it saves me time.

After you use usb burning tool (with default settings that is also recomended by minix) you have bugs in the firmware then you know that the problem is not the method you flashed earlier.
Many thanks.
 
Back
Top