X8-H Plus [Err]--[0x30405006]UBOOT/Partition system/Verify patition/Timeout error

Retro_Mod_Gamer

New member
Hello community! I got my first Minix box, a new condition X8-H Plus and saw there was a simple process to upgrade to Lollipop and firmware readily available. As running Kodi Leia is important to me I decided to set it up, after trouble shooting to get past the initial failures on Usb Burning Tool I was excited to see the process was about to complete but then it stuck on 96%. and now I can't boot the console at all. I can still connect it to USB burning tool and achieve the same results but i can't get anything to show up on HDMI and obviously I can't complete the firmware upgrade. I've tried advice in this forum and the furthest I make it is 96% then timeout. Is my box bricked or does anyone have suggestions?

notes:
USB burning tool 2.2
firmware file:
X8H_PLUS_LOLLIPOP_RC2.img
I've tried two different USB cables, running windows 10 and I also put the app into windows 7 compatibility mode
I've tried disabling my firewall and antivirus
I've tested the console on two different displays (720p and 1080p)
only the red optical light comes on when i turn it on
No problem being detected by usb burning tool, however cannot boot into recovery mode as there is no display coming from the box.

[17:47:27 155][Global][Inf]--User select Key burn Instruction menu
[17:47:54 241][Global][War]--User click stop button
[17:47:54 256][Global][Inf]--Enable burning 0
[17:47:58 146][Global][Inf]--User click start button
[17:47:58 146][Global][Inf]--SetErase
[17:47:58 146][Global][Inf]--Enable burning 1
[17:47:58 150][Global][Inf]--Scan usb device
[17:47:58 150][Global][Inf]--Aml scan WorldCup Device
[17:47:58 151][Global][Inf]--Host: USB xHCI Compliant Host Controller
[17:47:58 152][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_15e1&subsys_134d1025&rev_00#4&35feb52a&0&0441#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[17:47:58 152][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&37b2da21&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[17:47:58 152][Global][Inf]-------->[Port0]NoDeviceConnected
[17:47:58 152][Global][Inf]-------->[Port1]NoDeviceConnected
[17:47:58 152][Global][Inf]-------->[Port2]NoDeviceConnected
[17:47:58 153][Global][Inf]--Host: USB xHCI Compliant Host Controller
[17:47:58 153][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_15e0&subsys_134d1025&rev_00#4&35feb52a&0&0341#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[17:47:58 153][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2dd58d6e&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[17:47:58 154][Global][Inf]-------->[Port0]Other device
[17:47:58 154][Global][Inf]-------->[Port1]NoDeviceConnected
[17:47:58 155][Global][Inf]-------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[17:47:58 156][Global][Inf]-------->[Port3]Other device
[17:47:58 156][Global][Inf]-------->[Port4]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port5]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port6]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port7]NoDeviceConnected
[17:47:58 156][Global][Inf]--Scan USB host controller complete
[17:47:58 156][Global][Inf]--Update data center with HubMap
[17:47:58 156][Global][Inf]--Update hub2 device data
[17:47:58 156][Global][Inf]--Update HUB2-1
[17:47:58 156][HUB2-1][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-2
[17:47:58 156][HUB2-2][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-3 \\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[17:47:58 156][HUB2-3][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-4
[17:47:58 156][HUB2-4][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-5
[17:47:58 156][HUB2-5][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-6
[17:47:58 156][HUB2-6][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-7
[17:47:58 157][HUB2-7][Inf]--Update device path
[17:47:58 157][Global][Inf]--Update HUB2-8
[17:47:58 157][HUB2-8][Inf]--Update device path
[17:47:58 157][Global][Inf]--Scan end
[17:47:58 180][Global][Inf]--Burning thread HUB2-3 start
[17:47:58 243][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000007c8
[17:47:58 307][HUB2-3][Inf]--Connect path=USB xHCI Compliant Host Controller/P0/P2
[17:47:58 307][HUB2-3][Inf]--Start burning...
[17:47:58 369][HUB2-3][Inf]--------------ERASE BOOTLOADER------------
[17:47:58 369][HUB2-3][Inf]-------------Download DDR.USB-----------
[17:48:01 380][HUB2-3][Inf]--0-7-0-16
[17:48:01 380][HUB2-3][Inf]--No need download
[17:48:01 380][HUB2-3][Inf]-------------Download UBOOT_COMP.USB-----------
[17:48:01 380][HUB2-3][Inf]--0-7-0-16
[17:48:01 380][HUB2-3][Inf]--No need download
[17:48:01 380][HUB2-3][Inf]-- low_power
[17:48:01 380][HUB2-3][Inf]--Send command success
[17:48:01 380][HUB2-3][Inf]--Read command status success
[17:48:01 380][HUB2-3][Inf]-------------ERASE FLASH-----------
[17:48:03 407][HUB2-3][Inf]--send command diskinit
[17:48:03 407][HUB2-3][Inf]--disk_initial 1
[17:48:03 407][HUB2-3][Inf]--Send command success
[17:48:03 407][HUB2-3][Inf]--Read command diskinit status
[17:48:03 407][HUB2-3][Inf]--Read command status success
[17:48:03 407][HUB2-3][Inf]-------------Download meson.dtb-----------
[17:48:03 407][HUB2-3][Inf]--0-7-0-16
[17:48:03 407][HUB2-3][Inf]-- download mem dtb normal 135168
[17:48:03 407][HUB2-3][Inf]--Send download command success
[17:48:03 422][HUB2-3][Inf]--Read command status success
[17:48:03 485][HUB2-3][Inf]--Transfer complete
[17:48:03 485][HUB2-3][Inf]--Send download get_status command succeed
[17:48:03 485][HUB2-3][Inf]--get_status success
[17:48:03 999][HUB2-3][Inf]-------------Download boot.PARTITION-----------
[17:48:03 999][HUB2-3][Inf]--0-7-0-16
[17:48:03 999][HUB2-3][Inf]--download store boot normal 16259072
[17:48:03 999][HUB2-3][Inf]--Send download command success
[17:48:04 017][HUB2-3][Inf]--Read command status success
[17:48:07 712][HUB2-3][Inf]--Transfer complete
[17:48:07 712][HUB2-3][Inf]--Send download get_status command succeed
[17:48:07 712][HUB2-3][Inf]--get_status success
[17:48:07 712][HUB2-3][Inf]--verify sha1sum 6157fd1ed03d6b453b26d95a38dccdc1d88d4e70
[17:48:07 712][HUB2-3][Inf]--Send verify cmd succeed
[17:48:07 712][HUB2-3][Inf]--ItemSize: 16259072
[17:48:09 241][HUB2-3][Inf]--Get verify status success
[17:48:09 757][HUB2-3][Inf]-------------Download logo.PARTITION-----------
[17:48:09 757][HUB2-3][Inf]--0-7-0-16
[17:48:09 757][HUB2-3][Inf]--download store logo normal 5048640
[17:48:09 757][HUB2-3][Inf]--Send download command success
[17:48:09 773][HUB2-3][Inf]--Read command status success
[17:48:10 917][HUB2-3][Inf]--Transfer complete
[17:48:10 917][HUB2-3][Inf]--Send download get_status command succeed
[17:48:10 917][HUB2-3][Inf]--get_status success
[17:48:10 917][HUB2-3][Inf]--verify sha1sum 627db163f7e9f7c5f47276b3e76dfa57fae2a451
[17:48:10 917][HUB2-3][Inf]--Send verify cmd succeed
[17:48:10 917][HUB2-3][Inf]--ItemSize: 5048640
[17:48:11 417][HUB2-3][Inf]--Get verify status success
[17:48:11 932][HUB2-3][Inf]-------------Download recovery.PARTITION-----------
[17:48:11 932][HUB2-3][Inf]--0-7-0-16
[17:48:11 932][HUB2-3][Inf]--download store recovery normal 17864704
[17:48:11 932][HUB2-3][Inf]--Send download command success
[17:48:11 947][HUB2-3][Inf]--Read command status success
[17:48:15 911][HUB2-3][Inf]--Transfer complete
[17:48:15 911][HUB2-3][Inf]--Send download get_status command succeed
[17:48:15 911][HUB2-3][Inf]--get_status success
[17:48:15 911][HUB2-3][Inf]--verify sha1sum bbd34e6c8a7b99db6ddd94e8098e7d85ea2b00e3
[17:48:15 911][HUB2-3][Inf]--Send verify cmd succeed
[17:48:15 911][HUB2-3][Inf]--ItemSize: 17864704
[17:48:17 606][HUB2-3][Inf]--Get verify status success
[17:48:18 129][HUB2-3][Inf]-------------Download system.PARTITION-----------
[17:48:18 129][HUB2-3][Inf]--0-7-0-16
[17:48:18 129][HUB2-3][Inf]--download store system sparse 897415520
[17:48:18 129][HUB2-3][Inf]--Send download command success
[17:48:18 145][HUB2-3][Inf]--Read command status success
[17:50:25 094][HUB2-3][Inf]--Transfer complete
[17:50:25 094][HUB2-3][Inf]--Send download get_status command succeed
[17:50:25 094][HUB2-3][Inf]--get_status success
[17:50:25 094][HUB2-3][Inf]--verify sha1sum f93e878c1722fdf0e05cbd9ce991dffabf87a932
[17:50:25 094][HUB2-3][Inf]--Send verify cmd succeed
[17:50:25 094][HUB2-3][Inf]--ItemSize: 897415520
[17:51:25 105][HUB2-3][Err]--usb_reap_async_nocancel Try 2 time! ret=-116 Timeout= 30
, usbReadFile len 512 to read, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error


[17:51:25 113][HUB2-3][Err]--[0x30405006]UBOOT/Partition system/Verify patition/Timeout error
[17:51:25 113][HUB2-3][Inf]--Close device handle 0x000007c8
 
Hello community! I got my first Minix box, a new condition X8-H Plus and saw there was a simple process to upgrade to Lollipop and firmware readily available. As running Kodi Leia is important to me I decided to set it up, after trouble shooting to get past the initial failures on Usb Burning Tool I was excited to see the process was about to complete but then it stuck on 96%. and now I can't boot the console at all. I can still connect it to USB burning tool and achieve the same results but i can't get anything to show up on HDMI and obviously I can't complete the firmware upgrade. I've tried advice in this forum and the furthest I make it is 96% then timeout. Is my box bricked or does anyone have suggestions?

notes:
USB burning tool 2.2
firmware file:
X8H_PLUS_LOLLIPOP_RC2.img
I've tried two different USB cables, running windows 10 and I also put the app into windows 7 compatibility mode
I've tried disabling my firewall and antivirus
I've tested the console on two different displays (720p and 1080p)
only the red optical light comes on when i turn it on
No problem being detected by usb burning tool, however cannot boot into recovery mode as there is no display coming from the box.

[17:47:27 155][Global][Inf]--User select Key burn Instruction menu
[17:47:54 241][Global][War]--User click stop button
[17:47:54 256][Global][Inf]--Enable burning 0
[17:47:58 146][Global][Inf]--User click start button
[17:47:58 146][Global][Inf]--SetErase
[17:47:58 146][Global][Inf]--Enable burning 1
[17:47:58 150][Global][Inf]--Scan usb device
[17:47:58 150][Global][Inf]--Aml scan WorldCup Device
[17:47:58 151][Global][Inf]--Host: USB xHCI Compliant Host Controller
[17:47:58 152][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_15e1&subsys_134d1025&rev_00#4&35feb52a&0&0441#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[17:47:58 152][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&37b2da21&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[17:47:58 152][Global][Inf]-------->[Port0]NoDeviceConnected
[17:47:58 152][Global][Inf]-------->[Port1]NoDeviceConnected
[17:47:58 152][Global][Inf]-------->[Port2]NoDeviceConnected
[17:47:58 153][Global][Inf]--Host: USB xHCI Compliant Host Controller
[17:47:58 153][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_15e0&subsys_134d1025&rev_00#4&35feb52a&0&0341#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[17:47:58 153][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2dd58d6e&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[17:47:58 154][Global][Inf]-------->[Port0]Other device
[17:47:58 154][Global][Inf]-------->[Port1]NoDeviceConnected
[17:47:58 155][Global][Inf]-------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[17:47:58 156][Global][Inf]-------->[Port3]Other device
[17:47:58 156][Global][Inf]-------->[Port4]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port5]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port6]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port7]NoDeviceConnected
[17:47:58 156][Global][Inf]--Scan USB host controller complete
[17:47:58 156][Global][Inf]--Update data center with HubMap
[17:47:58 156][Global][Inf]--Update hub2 device data
[17:47:58 156][Global][Inf]--Update HUB2-1
[17:47:58 156][HUB2-1][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-2
[17:47:58 156][HUB2-2][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-3 \\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[17:47:58 156][HUB2-3][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-4
[17:47:58 156][HUB2-4][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-5
[17:47:58 156][HUB2-5][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-6
[17:47:58 156][HUB2-6][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-7
[17:47:58 157][HUB2-7][Inf]--Update device path
[17:47:58 157][Global][Inf]--Update HUB2-8
[17:47:58 157][HUB2-8][Inf]--Update device path
[17:47:58 157][Global][Inf]--Scan end
[17:47:58 180][Global][Inf]--Burning thread HUB2-3 start
[17:47:58 243][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000007c8
[17:47:58 307][HUB2-3][Inf]--Connect path=USB xHCI Compliant Host Controller/P0/P2
[17:47:58 307][HUB2-3][Inf]--Start burning...
[17:47:58 369][HUB2-3][Inf]--------------ERASE BOOTLOADER------------
[17:47:58 369][HUB2-3][Inf]-------------Download DDR.USB-----------
[17:48:01 380][HUB2-3][Inf]--0-7-0-16
[17:48:01 380][HUB2-3][Inf]--No need download
[17:48:01 380][HUB2-3][Inf]-------------Download UBOOT_COMP.USB-----------
[17:48:01 380][HUB2-3][Inf]--0-7-0-16
[17:48:01 380][HUB2-3][Inf]--No need download
[17:48:01 380][HUB2-3][Inf]-- low_power
[17:48:01 380][HUB2-3][Inf]--Send command success
[17:48:01 380][HUB2-3][Inf]--Read command status success
[17:48:01 380][HUB2-3][Inf]-------------ERASE FLASH-----------
[17:48:03 407][HUB2-3][Inf]--send command diskinit
[17:48:03 407][HUB2-3][Inf]--disk_initial 1
[17:48:03 407][HUB2-3][Inf]--Send command success
[17:48:03 407][HUB2-3][Inf]--Read command diskinit status
[17:48:03 407][HUB2-3][Inf]--Read command status success
[17:48:03 407][HUB2-3][Inf]-------------Download meson.dtb-----------
[17:48:03 407][HUB2-3][Inf]--0-7-0-16
[17:48:03 407][HUB2-3][Inf]-- download mem dtb normal 135168
[17:48:03 407][HUB2-3][Inf]--Send download command success
[17:48:03 422][HUB2-3][Inf]--Read command status success
[17:48:03 485][HUB2-3][Inf]--Transfer complete
[17:48:03 485][HUB2-3][Inf]--Send download get_status command succeed
[17:48:03 485][HUB2-3][Inf]--get_status success
[17:48:03 999][HUB2-3][Inf]-------------Download boot.PARTITION-----------
[17:48:03 999][HUB2-3][Inf]--0-7-0-16
[17:48:03 999][HUB2-3][Inf]--download store boot normal 16259072
[17:48:03 999][HUB2-3][Inf]--Send download command success
[17:48:04 017][HUB2-3][Inf]--Read command status success
[17:48:07 712][HUB2-3][Inf]--Transfer complete
[17:48:07 712][HUB2-3][Inf]--Send download get_status command succeed
[17:48:07 712][HUB2-3][Inf]--get_status success
[17:48:07 712][HUB2-3][Inf]--verify sha1sum 6157fd1ed03d6b453b26d95a38dccdc1d88d4e70
[17:48:07 712][HUB2-3][Inf]--Send verify cmd succeed
[17:48:07 712][HUB2-3][Inf]--ItemSize: 16259072
[17:48:09 241][HUB2-3][Inf]--Get verify status success
[17:48:09 757][HUB2-3][Inf]-------------Download logo.PARTITION-----------
[17:48:09 757][HUB2-3][Inf]--0-7-0-16
[17:48:09 757][HUB2-3][Inf]--download store logo normal 5048640
[17:48:09 757][HUB2-3][Inf]--Send download command success
[17:48:09 773][HUB2-3][Inf]--Read command status success
[17:48:10 917][HUB2-3][Inf]--Transfer complete
[17:48:10 917][HUB2-3][Inf]--Send download get_status command succeed
[17:48:10 917][HUB2-3][Inf]--get_status success
[17:48:10 917][HUB2-3][Inf]--verify sha1sum 627db163f7e9f7c5f47276b3e76dfa57fae2a451
[17:48:10 917][HUB2-3][Inf]--Send verify cmd succeed
[17:48:10 917][HUB2-3][Inf]--ItemSize: 5048640
[17:48:11 417][HUB2-3][Inf]--Get verify status success
[17:48:11 932][HUB2-3][Inf]-------------Download recovery.PARTITION-----------
[17:48:11 932][HUB2-3][Inf]--0-7-0-16
[17:48:11 932][HUB2-3][Inf]--download store recovery normal 17864704
[17:48:11 932][HUB2-3][Inf]--Send download command success
[17:48:11 947][HUB2-3][Inf]--Read command status success
[17:48:15 911][HUB2-3][Inf]--Transfer complete
[17:48:15 911][HUB2-3][Inf]--Send download get_status command succeed
[17:48:15 911][HUB2-3][Inf]--get_status success
[17:48:15 911][HUB2-3][Inf]--verify sha1sum bbd34e6c8a7b99db6ddd94e8098e7d85ea2b00e3
[17:48:15 911][HUB2-3][Inf]--Send verify cmd succeed
[17:48:15 911][HUB2-3][Inf]--ItemSize: 17864704
[17:48:17 606][HUB2-3][Inf]--Get verify status success
[17:48:18 129][HUB2-3][Inf]-------------Download system.PARTITION-----------
[17:48:18 129][HUB2-3][Inf]--0-7-0-16
[17:48:18 129][HUB2-3][Inf]--download store system sparse 897415520
[17:48:18 129][HUB2-3][Inf]--Send download command success
[17:48:18 145][HUB2-3][Inf]--Read command status success
[17:50:25 094][HUB2-3][Inf]--Transfer complete
[17:50:25 094][HUB2-3][Inf]--Send download get_status command succeed
[17:50:25 094][HUB2-3][Inf]--get_status success
[17:50:25 094][HUB2-3][Inf]--verify sha1sum f93e878c1722fdf0e05cbd9ce991dffabf87a932
[17:50:25 094][HUB2-3][Inf]--Send verify cmd succeed
[17:50:25 094][HUB2-3][Inf]--ItemSize: 897415520
[17:51:25 105][HUB2-3][Err]--usb_reap_async_nocancel Try 2 time! ret=-116 Timeout= 30
, usbReadFile len 512 to read, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error


[17:51:25 113][HUB2-3][Err]--[0x30405006]UBOOT/Partition system/Verify patition/Timeout error
[17:51:25 113][HUB2-3][Inf]--Close device handle 0x000007c8



I have the same problem...
 
lk heb gisteren mijn X8-H plus geupgrade naar Lollipop 5.1.1 met (Amlogic USB_Burning_Tool and driver_v2.0.9) met behulp van dit filmpje en dat werkt perfect.

Mod Edit: yesterday i upgraded my X8-H plus to Lollipop 5.1.1 with (Amlogic USB_Burning_Tool and driver_v2.0.9) using this video and it works perfectly.

 
Last edited by a moderator:
Hello community! I got my first Minix box, a new condition X8-H Plus and saw there was a simple process to upgrade to Lollipop and firmware readily available. As running Kodi Leia is important to me I decided to set it up, after trouble shooting to get past the initial failures on Usb Burning Tool I was excited to see the process was about to complete but then it stuck on 96%. and now I can't boot the console at all. I can still connect it to USB burning tool and achieve the same results but i can't get anything to show up on HDMI and obviously I can't complete the firmware upgrade. I've tried advice in this forum and the furthest I make it is 96% then timeout. Is my box bricked or does anyone have suggestions?

notes:
USB burning tool 2.2
firmware file:
X8H_PLUS_LOLLIPOP_RC2.img
I've tried two different USB cables, running windows 10 and I also put the app into windows 7 compatibility mode
I've tried disabling my firewall and antivirus
I've tested the console on two different displays (720p and 1080p)
only the red optical light comes on when i turn it on
No problem being detected by usb burning tool, however cannot boot into recovery mode as there is no display coming from the box.

[17:47:27 155][Global][Inf]--User select Key burn Instruction menu
[17:47:54 241][Global][War]--User click stop button
[17:47:54 256][Global][Inf]--Enable burning 0
[17:47:58 146][Global][Inf]--User click start button
[17:47:58 146][Global][Inf]--SetErase
[17:47:58 146][Global][Inf]--Enable burning 1
[17:47:58 150][Global][Inf]--Scan usb device
[17:47:58 150][Global][Inf]--Aml scan WorldCup Device
[17:47:58 151][Global][Inf]--Host: USB xHCI Compliant Host Controller
[17:47:58 152][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_15e1&subsys_134d1025&rev_00#4&35feb52a&0&0441#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[17:47:58 152][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&37b2da21&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[17:47:58 152][Global][Inf]-------->[Port0]NoDeviceConnected
[17:47:58 152][Global][Inf]-------->[Port1]NoDeviceConnected
[17:47:58 152][Global][Inf]-------->[Port2]NoDeviceConnected
[17:47:58 153][Global][Inf]--Host: USB xHCI Compliant Host Controller
[17:47:58 153][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_15e0&subsys_134d1025&rev_00#4&35feb52a&0&0341#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[17:47:58 153][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2dd58d6e&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[17:47:58 154][Global][Inf]-------->[Port0]Other device
[17:47:58 154][Global][Inf]-------->[Port1]NoDeviceConnected
[17:47:58 155][Global][Inf]-------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[17:47:58 156][Global][Inf]-------->[Port3]Other device
[17:47:58 156][Global][Inf]-------->[Port4]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port5]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port6]NoDeviceConnected
[17:47:58 156][Global][Inf]-------->[Port7]NoDeviceConnected
[17:47:58 156][Global][Inf]--Scan USB host controller complete
[17:47:58 156][Global][Inf]--Update data center with HubMap
[17:47:58 156][Global][Inf]--Update hub2 device data
[17:47:58 156][Global][Inf]--Update HUB2-1
[17:47:58 156][HUB2-1][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-2
[17:47:58 156][HUB2-2][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-3 \\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[17:47:58 156][HUB2-3][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-4
[17:47:58 156][HUB2-4][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-5
[17:47:58 156][HUB2-5][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-6
[17:47:58 156][HUB2-6][Inf]--Update device path
[17:47:58 156][Global][Inf]--Update HUB2-7
[17:47:58 157][HUB2-7][Inf]--Update device path
[17:47:58 157][Global][Inf]--Update HUB2-8
[17:47:58 157][HUB2-8][Inf]--Update device path
[17:47:58 157][Global][Inf]--Scan end
[17:47:58 180][Global][Inf]--Burning thread HUB2-3 start
[17:47:58 243][HUB2-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&179480a&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000007c8
[17:47:58 307][HUB2-3][Inf]--Connect path=USB xHCI Compliant Host Controller/P0/P2
[17:47:58 307][HUB2-3][Inf]--Start burning...
[17:47:58 369][HUB2-3][Inf]--------------ERASE BOOTLOADER------------
[17:47:58 369][HUB2-3][Inf]-------------Download DDR.USB-----------
[17:48:01 380][HUB2-3][Inf]--0-7-0-16
[17:48:01 380][HUB2-3][Inf]--No need download
[17:48:01 380][HUB2-3][Inf]-------------Download UBOOT_COMP.USB-----------
[17:48:01 380][HUB2-3][Inf]--0-7-0-16
[17:48:01 380][HUB2-3][Inf]--No need download
[17:48:01 380][HUB2-3][Inf]-- low_power
[17:48:01 380][HUB2-3][Inf]--Send command success
[17:48:01 380][HUB2-3][Inf]--Read command status success
[17:48:01 380][HUB2-3][Inf]-------------ERASE FLASH-----------
[17:48:03 407][HUB2-3][Inf]--send command diskinit
[17:48:03 407][HUB2-3][Inf]--disk_initial 1
[17:48:03 407][HUB2-3][Inf]--Send command success
[17:48:03 407][HUB2-3][Inf]--Read command diskinit status
[17:48:03 407][HUB2-3][Inf]--Read command status success
[17:48:03 407][HUB2-3][Inf]-------------Download meson.dtb-----------
[17:48:03 407][HUB2-3][Inf]--0-7-0-16
[17:48:03 407][HUB2-3][Inf]-- download mem dtb normal 135168
[17:48:03 407][HUB2-3][Inf]--Send download command success
[17:48:03 422][HUB2-3][Inf]--Read command status success
[17:48:03 485][HUB2-3][Inf]--Transfer complete
[17:48:03 485][HUB2-3][Inf]--Send download get_status command succeed
[17:48:03 485][HUB2-3][Inf]--get_status success
[17:48:03 999][HUB2-3][Inf]-------------Download boot.PARTITION-----------
[17:48:03 999][HUB2-3][Inf]--0-7-0-16
[17:48:03 999][HUB2-3][Inf]--download store boot normal 16259072
[17:48:03 999][HUB2-3][Inf]--Send download command success
[17:48:04 017][HUB2-3][Inf]--Read command status success
[17:48:07 712][HUB2-3][Inf]--Transfer complete
[17:48:07 712][HUB2-3][Inf]--Send download get_status command succeed
[17:48:07 712][HUB2-3][Inf]--get_status success
[17:48:07 712][HUB2-3][Inf]--verify sha1sum 6157fd1ed03d6b453b26d95a38dccdc1d88d4e70
[17:48:07 712][HUB2-3][Inf]--Send verify cmd succeed
[17:48:07 712][HUB2-3][Inf]--ItemSize: 16259072
[17:48:09 241][HUB2-3][Inf]--Get verify status success
[17:48:09 757][HUB2-3][Inf]-------------Download logo.PARTITION-----------
[17:48:09 757][HUB2-3][Inf]--0-7-0-16
[17:48:09 757][HUB2-3][Inf]--download store logo normal 5048640
[17:48:09 757][HUB2-3][Inf]--Send download command success
[17:48:09 773][HUB2-3][Inf]--Read command status success
[17:48:10 917][HUB2-3][Inf]--Transfer complete
[17:48:10 917][HUB2-3][Inf]--Send download get_status command succeed
[17:48:10 917][HUB2-3][Inf]--get_status success
[17:48:10 917][HUB2-3][Inf]--verify sha1sum 627db163f7e9f7c5f47276b3e76dfa57fae2a451
[17:48:10 917][HUB2-3][Inf]--Send verify cmd succeed
[17:48:10 917][HUB2-3][Inf]--ItemSize: 5048640
[17:48:11 417][HUB2-3][Inf]--Get verify status success
[17:48:11 932][HUB2-3][Inf]-------------Download recovery.PARTITION-----------
[17:48:11 932][HUB2-3][Inf]--0-7-0-16
[17:48:11 932][HUB2-3][Inf]--download store recovery normal 17864704
[17:48:11 932][HUB2-3][Inf]--Send download command success
[17:48:11 947][HUB2-3][Inf]--Read command status success
[17:48:15 911][HUB2-3][Inf]--Transfer complete
[17:48:15 911][HUB2-3][Inf]--Send download get_status command succeed
[17:48:15 911][HUB2-3][Inf]--get_status success
[17:48:15 911][HUB2-3][Inf]--verify sha1sum bbd34e6c8a7b99db6ddd94e8098e7d85ea2b00e3
[17:48:15 911][HUB2-3][Inf]--Send verify cmd succeed
[17:48:15 911][HUB2-3][Inf]--ItemSize: 17864704
[17:48:17 606][HUB2-3][Inf]--Get verify status success
[17:48:18 129][HUB2-3][Inf]-------------Download system.PARTITION-----------
[17:48:18 129][HUB2-3][Inf]--0-7-0-16
[17:48:18 129][HUB2-3][Inf]--download store system sparse 897415520
[17:48:18 129][HUB2-3][Inf]--Send download command success
[17:48:18 145][HUB2-3][Inf]--Read command status success
[17:50:25 094][HUB2-3][Inf]--Transfer complete
[17:50:25 094][HUB2-3][Inf]--Send download get_status command succeed
[17:50:25 094][HUB2-3][Inf]--get_status success
[17:50:25 094][HUB2-3][Inf]--verify sha1sum f93e878c1722fdf0e05cbd9ce991dffabf87a932
[17:50:25 094][HUB2-3][Inf]--Send verify cmd succeed
[17:50:25 094][HUB2-3][Inf]--ItemSize: 897415520
[17:51:25 105][HUB2-3][Err]--usb_reap_async_nocancel Try 2 time! ret=-116 Timeout= 30
, usbReadFile len 512 to read, ret=-116 error_msg=libusb0-dll:err [_usb_reap_async] timeout error


[17:51:25 113][HUB2-3][Err]--[0x30405006]UBOOT/Partition system/Verify patition/Timeout error
[17:51:25 113][HUB2-3][Inf]--Close device handle 0x000007c8

use the flashing method using SD card, this method helped me, make a bootable SD card using Amlogic Burn Card Maker, the forum has a detailed description with a video. https://theminixforum.com/index.php...pop-firmware-update-with-burn-card-maker.234/ In my case, after trying to flash using the Burning Tool, at 96 percent an error appeared like you did, after that my minix was no longer detected on the computer and in the application, I got a "brick", but using this method everything was restored, and lollipop 5.1 was flashed
 
Back
Top