regismaltais33
Member
And I connect my Minix Neo U9-H directly to my router with an ethernet cable
There should be very little difference running CE off a USB memory stick from running internally. Internally will boot faster and the menu/interface will be a little snappier, but watching movies should be pretty much the same.
I tested CE by running off an SD card (32GB Class 10). All was good. If you are disappointed I would not install internally until you get satisfactory performance from an SD card.
1 - How did you prepare the SD card? I used the LibreELEC USB SD Creator software.
2 - Did you set the DTB file correctly? I have had VERY poor performance if I forget to set it correctly for my hardware.
1 - How did you prepare the SD card? I used the LibreELEC USB SD Creator software.
2 - Did you set the DTB file correctly? I have had VERY poor performance if I forget to set it correctly for my hardware.
Just manually updated CE to 9.2.0 . I did not get the OTA but have looked for it in CE and then updated. It looks like it's all working flawless.
Interesting for T5 and U22-XJ, latest minix Amlogic devicesCoreELEC 9.2.0
CoreELEC 9.2.0 is now available. We have come a long way since our first 9.0.0 release 7 months ago, and there have been big changes in CoreELEC. Based upon Kodi v18.4 final, this release has added support for more devices than ever before. CoreELEC now supports the very latest Amlogic chipsets, including S905X2/S922X and A311D using the Amlogic 4.9 Linux vendor kernel.
Changes since 9.0.3:
- added ability to turn on/off 5v power during power-off/sleep on ODROID-N2
- added BL301 inject feature
- added support for Beelink GT-King (S922X)
- added support for Khadas VIM3 (A311D)
- added support for S905X2 devices
- added WiFi firmware for devices with AP6236 chipset
- added WiFi driver for RTL8822BS
- fixed RTL8723BS bluetooth support
- rebranded Kodi
- updated DVB drivers
- updated OpenVFD driver
- updated OpenVPN to enable server mode
CoreELEC 9.2.0 how to return the previous design Kodi?
I dont know what you mean by "previous design kodi". and why ? as @allmankind also said.CoreELEC 9.2.0 how to return the previous design Kodi?
Just choose in Skin under color the blue type.CoreELEC 9.2.0 how to return the previous design Kodi?
Latest release (the "red" one):
Still getting the countdown bug at start up, except now it's worse cannot by pass it by clicking on any key on the remote!...
Is there a solution other than going back to previous version?
View attachment 1024
No need to.
Just connect with SSH to your Corelec using Winscp.exe and copy the good dtb.img
Hi.I am running the CoreElec 9.2.0 release on my U9-H and have been having issues with incorrect decoding of multi-channel E-AAC.
Any suggestions on how to resolve my E-AAC decoding issues?
I am experiencing some annoyance type issues with the latest 9.2.0 CE release. Just wondering if anyone else has experienced anything similar.
1: If I turn my TV off for a while (leaving the U9H and AVR on), often (not always) when I turn the TV back on the image displayed is green (it should be blue - Kodi Confluence skin).
2: I am experiencing some movies (on attached hard disk) doing an intermittent dance. I have always experienced the occasional quick freeze or jump, as if a frame or two was missing, but this is different in that the video skips back maybe half a second or so every minute or two.
I should add that neither of these issues existed under CE 9.0.3. Regarding issue #2, I have looked at the mediainfo display of both the offending videos and ones that play without an issue and can find nothing to indicate a problem. I should also point out that the offending videos play without any issues on the computer.
Anyone have any ideas? In the meantime I am patiently waiting for a CE update, which I hope might solve the issues.