Yes I found one thread with the same issue but no solution.
If this can't be solved I obviously don't want to use CE.
What other options are there?
CoreELEC - MINIX U9-H
- Thread starter Skynet
- Start date
Yes I found one thread with the same issue but no solution.
If this can't be solved I obviously don't want to use CE.
What other options are there?
Does anyone know how to disable usb power when the device is shutdown? I've got two SSD's attached and currently when I shut the U9-H down the SSD's remain powered on, I've googled it and found you can add usbpower=0 to config.ini, but there doesn't appear to be a config.ini on the U9-H, thanks.
Skynet
Administrator
CoreElec 9.2.1 is available.
CoreELEC 9.2.1
CoreELEC 9.2.1 is now available, bringing with it Kodi v18.5, along with some new additions and a number of small bug fixes that we identified thanks to feedback received from users in our forums.
Changes since 9.2.0:
CoreELEC 9.2.1
CoreELEC 9.2.1 is now available, bringing with it Kodi v18.5, along with some new additions and a number of small bug fixes that we identified thanks to feedback received from users in our forums.
Changes since 9.2.0:
- added 4K GUI scaling toggle for G12 devices
- added internal dual boot support for G12 devices *
- added SoC model name to system information
- added support for custom video modes for G12 devices
- added support for multi channel pcm for G12 devices
- added WiFi and Bluetooth support for GX devices containing RTL8822B
- added Xbox One controller support for G12 devices
- fixed 4K OSD corruption for G12 devices (GUI scaling must be enabled)
- fixed Bluetooth for GX devices containing BCM4335A0
- fixed force 8bit display output Kodi setting
- fixed green screen issue on G12 devices
- fixed LePotato internal install script
- fixed HDR10+ playback on G12 devices
- fixed no Ethernet after rebooting from Android issue on GT-King
- updated Kodi to v18.5
- updated OpenVFD driver
allmankind
Active member
Been running 9.2.1 for a few days now. It appears the strange stuttering with some files has been fix, but (isn't there always a but?) now I have encountered a really peculiar stutter on an old (1990's) TV series. The stutter is so odd I just don't know how to describe it. It's like a combination of a vertical shutter and a very slight roll back. I should note that I have watched this series many time without a single issue. I assume this is a Kodi 18.5 issue.
The OSD can be activated using one of the following methods...
I want it configure to a Single Key by pressing like ''Z' or ''Y'' because the MINIX NEO A3 Remote do not have a Ctrl button, i tried everthing maybe i dismissed something please help me guys . Is there a CTRL Button in A3 remote Control .I am a big fan of Minix Products.
I use Coreelec , also i tried it to find in the Keymap Editor as Addon . But i was not able to Change it because the Option is not visible for me.
- Pressing ctrl+⇧ Shift+o on a keyboard
I want it configure to a Single Key by pressing like ''Z' or ''Y'' because the MINIX NEO A3 Remote do not have a Ctrl button, i tried everthing maybe i dismissed something please help me guys . Is there a CTRL Button in A3 remote Control .I am a big fan of Minix Products.
I use Coreelec , also i tried it to find in the Keymap Editor as Addon . But i was not able to Change it because the Option is not visible for me.
Last edited:
Skynet
Administrator
Have you read this thread ?
https://theminixforum.com/index.php?threads/coreelec-minix-u9-h.261/
https://theminixforum.com/index.php?threads/coreelec-minix-u9-h.261/
Skynet
Administrator
I think you should post there, some guys succeded to create a keybord file
allmankind
Active member
Running 9.2.1 on my U9H internally.
Since this latest update I have noticed much less occasional stutter when playing movies, so that's a plus. The odd stuttering issue I mentioned previously has only shown up on those few files (thankfully).
But now I am also having a power issue. I have always used the A2 Lite remote power button to shut down my U9H. It has always worked without issues, until 9.2.1. Now when I turn off the U9H, about 80% of the time the screen will go blank, but the blue LED does not go off.
My procedure is to always remove power from my devices when I am not using them. This means that power gets removed from the U9H while the blue LED is on. When I power on again, the U9H also starts, but often doesn't start properly and just hangs with a black screen.
The other 20% of the time it shuts down as it should.
Additionally, I am still getting the "green screen" with 9,2,1, although much less frequently than with 9.2.0.
Hopefully the next update will resolve this.
Since this latest update I have noticed much less occasional stutter when playing movies, so that's a plus. The odd stuttering issue I mentioned previously has only shown up on those few files (thankfully).
But now I am also having a power issue. I have always used the A2 Lite remote power button to shut down my U9H. It has always worked without issues, until 9.2.1. Now when I turn off the U9H, about 80% of the time the screen will go blank, but the blue LED does not go off.
My procedure is to always remove power from my devices when I am not using them. This means that power gets removed from the U9H while the blue LED is on. When I power on again, the U9H also starts, but often doesn't start properly and just hangs with a black screen.
The other 20% of the time it shuts down as it should.
Additionally, I am still getting the "green screen" with 9,2,1, although much less frequently than with 9.2.0.
Hopefully the next update will resolve this.
Skynet
Administrator
You can't, it's a TV setting.
notrui
Trusted Helper
Hi. You can go straight to nougat: (this is also official ROM)
https://theminixforum.com/index.php...91120-community-edition-nougat-firmware.2107/
You can use dual boot:
-boot from CoreElec (boot from pendrive for example)
-or boot from android.
Last edited:
notrui
Trusted Helper
I edited my previous post. Please read again.Thnx notrui!
Thank you
Hey guys,
I tried to run CE. But when I try to boot from pendrive, I gets stuck at the minix boot logo and does absolutely nothing.. When I pull out the pendrive and reboot, it runs just fine..
I followed all the steps exactly as mentioned...
1. Download the latest .img.gz file from here 4.5k.
2. Use Rufus 2.0k (or your preferred image writing software) to burn the downloaded image file to your SD card / USB flash drive.
3. Browse to the Device Trees folder, now present on the SD card or USB flash drive, and copy the correct .dtb 5.0k image file for your device to the root folder of the SD card / USB flash drive, and rename it to dtb.img.
What am I doing wrong?
I tried to run CE. But when I try to boot from pendrive, I gets stuck at the minix boot logo and does absolutely nothing.. When I pull out the pendrive and reboot, it runs just fine..
I followed all the steps exactly as mentioned...
1. Download the latest .img.gz file from here 4.5k.
2. Use Rufus 2.0k (or your preferred image writing software) to burn the downloaded image file to your SD card / USB flash drive.
3. Browse to the Device Trees folder, now present on the SD card or USB flash drive, and copy the correct .dtb 5.0k image file for your device to the root folder of the SD card / USB flash drive, and rename it to dtb.img.
What am I doing wrong?