The usb is not fs3 but fs1 so if you type the commands that run manually and change the fs3 in fs1 it should workHello again!
Someone can help me, please? I'm still stucked in bios update procedure.
Thanks!
The usb is not fs3 but fs1 so if you type the commands that run manually and change the fs3 in fs1 it should workHello again!
Someone can help me, please? I'm still stucked in bios update procedure.
Thanks!
Finally managed to update the bios, but this win10 says not activated and wont activate. Is this the same for everyone?
Yes updated a few times and updated windows etc.
You could try entering the license manually...Finally managed to update the bios, but this win10 says not activated and wont activate. Is this the same for everyone?
Can you send a PM to @MINIX - John or @MINIX – Martin ?
I did update via Microsoft and it installed a newer version of win10 home.
Now says activated.
Thanks to all.
Windows 10 OS image for NEO Z64-W is available to download from below:
Download Link 1 [MINIX Forum Server]:
https://files.theminixforum.com/shared/firmwares/Z64-W win10 OS.zip
Firmware installation instructions are attached to this post.
Windows 10 Home 32Bit. A limitation of the UEFI BIOS.this is z64w so 64 bit works? home edition?
Link works fine for me!Hi guys, Can you fix the link for neo z64 win 10 os software please.
This not work anymore https://files.theminixforum.com/shared/firmwares/Z64-W win10 OS.zip
You are right Thanks a lot for your replyLink works fine for me!
Try a different browser.
Hi guys, I need help applying the Windows 10 OS.
After my previous post, I already managed to upgrade the BIOS version to 1.83. I also ran into the fs3 vs fs1 problem but I found the BIOS file on this forum to do the upgrade from within Windows and that worked.
I extracted the contents of the 'Z64-W win10 OS.zip' from this forum onto my USB stick and followed the installation instructions: Pressed F11 when the Minix was starting and selected the USB stick but now I'm stuck on this. The process also seems to have removed everything from the USB stick.
View attachment 3765
How can I make this work?
I don't wish to insult your intelligence, but despite the instructions being relatively straightforward some users still sometimes miss a step.
Can you please confirm that you...
A. Formatted the USB stick to NTFS.
B. Renamed the USB stick to WINPE.
C. Copied the child files out of their containing zip & placed them directly on the USB stick (root). (If you have any other files on the USB stick (such as files for flashing a BIOS etc.) best to temporarily remove them, you can always move them back once your Z64 is running.
Sometimes the boot menu (F11) also doesn't work.
If you have the option available, try entering the BIOS & actually change the established boot order from the eMMC to the USB stick, save the settings & exit. (As soon as the system reboots if the Win installation successfully begins, you can immediately enter the BIOS again & revert the original boot order settings back to how they were, save & exit.)
Try that for now, if still no joy post back & others can add additional suggestions.