Villa
Administrator
Can I install on the Z83-4 PRO?
Yes this BIOS update is for the Z83-4 series of devices.Please do not flash. Z83-4 Pro is a different device.
Can I install on the Z83-4 PRO?
Yes this BIOS update is for the Z83-4 series of devices.Please do not flash. Z83-4 Pro is a different device.
Ok. I said no because i was not sure.Yes this BIOS update is for the Z83-4 series of devices.
Same hardware!Ok. I said no because i was not sure.
Before i said that i saw both specs and they are very similar.Same hardware!
YesI just got this box given to me. my project version is CHT0A. can I use this bios?
First post :Where the Project Version is mentioned?
It is extremely important to check if the "Project Version" in BIOS is started with "CAT0A".
If the "Project Version" starts with "CAT0C", then you can't use this BIOS, otherwise the device will become a brick, no reaction and cannot boot.
Hi.Hi, I installed this BIOS and now my box looks to be bricked. It only shows yellow light and does not turn to blue at all. BIOS upgrade went well as per the instructions. Please help
Hi.
Reflash BIOS.
You had some issue with upgrade, othewise your minix should start normaly.
Read the flash instructions step by step again (post 1).
I don't know if you checked "project version" eariler.
If you don't know what "Project version" you have and you are unable to enter BIOS i think it is better: (don't flash bios again)I am not able to get to BIOS screen now. How to get there first?
Oh Ok.If you don't know what "Project version" you have and you are unable to enter BIOS i think it is better: (don't flash bios again)
(Use method 2 or method 3)
https://neosmart.net/wiki/reset-bios-cmos/
What about:
Project Version: RTC0A 1.66 x64?
Is that version safe to flash the BIOS?
Thanks for the reply.
It is extremely important to check if the "Project Version" in BIOS is started with "CAT0A".
If the "Project Version" starts with "CAT0C", then you can't use this BIOS, otherwise the device will become a brick, no reaction and cannot boot.