Hi Guys
I have this problem while flashing my U9H:
[12:11:25 210][HUB1-6][Inf]--2-2-0-0
[12:11:25 210][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[12:11:25 713][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x00005183
[12:11:26 217][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[12:11:26 719][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x00005183
[12:11:27 223][HUB1-6][Inf]--Write initial succeed
[12:11:27 223][HUB1-6][Inf]--Upload encrypt at 0xc8100228
[12:11:27 225][HUB1-6][Inf]--ulValue = 0xadfd718c
[12:11:27 225][HUB1-6][Inf]--Read encrypt value succeed
[12:11:27 225][HUB1-6][Inf]--Download DDR.USB,size: 49152!
[12:11:27 238][HUB1-6][Inf]--Transfer complete 49152
[12:11:27 240][HUB1-6][Inf]--Run at address 0xd9000000
[12:11:27 246][HUB1-6][Inf]--RunInRam success
[12:11:27 271][HUB1-6][Inf]--2-2-0-0-0-1-0-0
[12:11:27 271][HUB1-6][Inf]--CheckFileRunState succeed
[12:11:42 275][HUB1-6][Err]--usbReadFile failed ret = -116
[12:11:42 275][HUB1-6][Err]--ReadPara failed
[12:11:42 282][HUB1-6][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[12:11:42 283][HUB1-6][Inf]--Close device handle 0x00000b44
Is there somebody else, with the same problem? Actually tried to flash the Latest Official Firmware because (after a long pause while it was offline) my box didnt want to boot (splash screen appear with Android logo and then nothing happened). For additional info there is a screenshot attached.
THX
Manó
I have this problem while flashing my U9H:
[12:11:25 210][HUB1-6][Inf]--2-2-0-0
[12:11:25 210][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[12:11:25 713][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x00005183
[12:11:26 217][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[12:11:26 719][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x00005183
[12:11:27 223][HUB1-6][Inf]--Write initial succeed
[12:11:27 223][HUB1-6][Inf]--Upload encrypt at 0xc8100228
[12:11:27 225][HUB1-6][Inf]--ulValue = 0xadfd718c
[12:11:27 225][HUB1-6][Inf]--Read encrypt value succeed
[12:11:27 225][HUB1-6][Inf]--Download DDR.USB,size: 49152!
[12:11:27 238][HUB1-6][Inf]--Transfer complete 49152
[12:11:27 240][HUB1-6][Inf]--Run at address 0xd9000000
[12:11:27 246][HUB1-6][Inf]--RunInRam success
[12:11:27 271][HUB1-6][Inf]--2-2-0-0-0-1-0-0
[12:11:27 271][HUB1-6][Inf]--CheckFileRunState succeed
[12:11:42 275][HUB1-6][Err]--usbReadFile failed ret = -116
[12:11:42 275][HUB1-6][Err]--ReadPara failed
[12:11:42 282][HUB1-6][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[12:11:42 283][HUB1-6][Inf]--Close device handle 0x00000b44
Is there somebody else, with the same problem? Actually tried to flash the Latest Official Firmware because (after a long pause while it was offline) my box didnt want to boot (splash screen appear with Android logo and then nothing happened). For additional info there is a screenshot attached.
THX
Manó