I purchased a 512GM Sandisk SD8SN8U SSD. Installed it and it was recognized by the computer. I created a USB stick per the instructions on this site. I disabled the eMMC via the BIOS and restarted with the USB stick installed. It went through the process of applying the image however upon reboot, it started a loop of again reading from the USB stick and applying the image again and again.
I powered off the computer, removed the USB stick, and renabled the emmc via bios. It boots back into the original Windows and the SSD card has a set of windows folders, but the system does not recognize it as a Windows instance (via System info). I am unable to format the SSD card as it says the drive is in use (but again I can confirm it is booting from the C: eMMC.)
Any suggestions on what I need to do to get a bootable version of Windows on the SSD?
I powered off the computer, removed the USB stick, and renabled the emmc via bios. It boots back into the original Windows and the SSD card has a set of windows folders, but the system does not recognize it as a Windows instance (via System info). I am unable to format the SSD card as it says the drive is in use (but again I can confirm it is booting from the C: eMMC.)
Any suggestions on what I need to do to get a bootable version of Windows on the SSD?